Başlık için Mühendislik Fakültesi listeleme
Toplam kayıt 83, listelenen: 17-36
-
Data mining techniques for the prediction of Bohme surface abrasion rates from rock properties
(ASTM International, Ocak 2020)Abrasion refers to the wearing down of rock surfaces due to abrasive grains. Abrasion resistance refers to the ability of rocks to withstand wear. Abrasion resistance is used to determine the resistance of building ... -
Dengeleme Hesabı - Teori ve Uygulama
(Dengeleme Hesabı - Teori ve Uygulama, Mayıs 2019)Bu kitap Harita, Jeodezi ve Fotogrametri, Geomatik Mühendisliği bölümlerinin lisans programında okutulan Dengeleme Hesabı I, II, Jeodezik Ağ Tasarımı, Hatalar Bilgisi ve İstatistik, Harita ve Kadastro ön lisans programlarında ... -
Design and implementation of p&o maximum power point tracker algorithm based solar charge controller
(International journal of applied mathematics, electronics and computers, 30.06.2019)Solar energy is one of the main sources of renewable energy. In photovoltaic systems, energy is obtained from photovoltaic batteries. In photovoltaic batteries, the current and voltage do not increase linearly. This causes ... -
Determination of actual dissolution rates from some rock properties in construction of deep salt cavern for natural gas storage
(Elsevier, 2020)Available energy resources should be efficiently used to meet the global energy demand. The storage of energy resources, especially as natural gas, is important to balance extreme fluctuations in demand and supply of energy. ... -
Determination of equilibrium, kinetic and thermodynamic parameters of Acid Red 88 adsorption onto montmorillonitic clay
(OAIMDD-EcoZone Publishing House, 01.01.2015)The aim of this study is to evaluate adsorption kinetics, isotherms and thermodynamic parameters of anionic textile dye (Acid Red 88) onto montmorillonitic clay from aqueous solutions. The parameters of pH, initial dye ... -
Determination of the hygienic quality of tap waters of Afyonkarahisar province
(Afyon Kocatepe Üniversitesi, 30.06.2020)In this study, the microbiological and chemical properties of drinking water taken from fountains in the city center of Afyonkarahisar province were investigated. As a result, Escherichia coli was detected in 9 (22.5%) ... -
Determining properties of nickel based composite that reinforced by electroless nicel plated boron nitride and astaloy-CrM powders
(Eskişehir Teknik Üniversitesi, 31.03.2020)Industrial development brings with it the need for new materials every day. When it comes to obtaining more than one feature together, composite materials are at the forefront of the material groups. In composite ... -
Development of efflorescence control methods of fly ash based foam geopolymers
(ICIVILTECH Afyonkarahisar, 2020)Since the environmental impacts of carbon emissions due to the cement production have started to be discussed, an alternative material has been sought. Geopolymers are new generation materials which are good candidates to ... -
Doğal taşların dairesel testereli kesiminde birim enerjinin kesim ve ortam parametrelerinden kestirimi
(Afyon Kocatepe Üniversitesi, 2020)Doğal taş işletmeciliği ve işlemeciliği, ülkemiz maden ihracatı için önemli sektörlerden biridir. Bu sektörde uluslararası rekabetin sürdürülebilir olması kaynakların verimli kullanımına bağlıdır. Doğal taş ocaklarından ... -
The effect of BaCO3 addition on the sintering behavior of lignite coal fly ash
(Elsevier, 11.04.2008)The effect of BaCO 3 (witherite) addition on the sintering behavior of lignite coal fly ash taken from the Seyitömer power plant of Kütahya/Turkey was examined at temperatures of 1100, 1150 and 1200 C in air atmosphere. ... -
Effect of composition on fly ash geopolymers
(SERES 2018, 2018)The geopolymer technology provides a new good and green solution to the utilization of fly ash, avoiding its negative impact on environment and ecology. The aluminasilicate minerals in fly ash can be activated with alkali ... -
The effect of different mineral additives on non-wettability and surface energy of epoxy floor coating [Farklı mineral katkıların epoksi zemin kaplama malzemesinin ıslanmazlığına ve yüzey enerjisine etkisi]
(Gazi Üniversitesi, 01.02.2018)Bu çalışmada epoksi esaslı zemin kaplama malzemesinin ıslanmazlık ve yüzey enerjisi üzerine mineral katkı türü ve miktarının etkisi incelenmiştir. Mineral katkı olarak üç farklı atık ürün (uçucu kül, silis dumanı ve yüksek ... -
Effect of hydrocarbon chain length on adsorption of cationic surfactants onto clinoptilolite
(Elsevier, 01.01.2003)The adsorption behavior of quaternary ammonium cationic surfactants with different hydrocarbon chain lengths, i.e. HDTMA (hexadecyltrimethylammonium), TDTMA (tetradecyltrimethy- lammonium) and DDTMA (dodecyltrimethylammonium), ... -
Effect of mineral admixture type on rheological properties of polymeric self-consolidating mortar [Kendiliǧinden yerleşen polimerik harçlarda mineral katkinin reolojik özeliklere etkisi]
(Gazi Üniversitesi, 24.02.2017)Polimer matrisli kompozitler, simetrik ve dengeli malzeme özelliklerine sahip olmaları, üretim ve kullanım kolaylıklarından dolayı inşaat, hava-uzay yapıları ve otomobil yapıları için popülerlik kazanmaktadır. Günümüzde ... -
Effect of mixing water types on the timedependent zeta potential of Portland cement paste
(De Gruyter, 18.03.2013)The measurement of zeta potential (ZP) has important applications in a wide range of industries including ceramics, pharmaceuticals, medicine, mineral processing, electronics, cement industry and water treatment. It ... -
Effect of pH and polymer charge density on settling rate and turbidity of natural stone suspensions
(Elsevier, 02.02.2005)In the present paper, the effects of suspension pH and charge density of anionic polyacrylamide (PAA) on flocculation behavior of two different natural stone suspensions (NSS) marble and travertine were investigated by ... -
The effect of pore morphology on the thermalconductıvıty of geopolymer foam
(4th International Powder and Porous Materials Symposium, 2019)Geopolymers are considered alternative to conventional cement recently. The use of fly ash and blast furnace slag in geopolymer, which are waste product considered as an environmentally friendly product due to the solution ... -
Effects of ice cream produced with lemon, mandarin and orange peel essential oils on some physicochemical, microbiological and sensorial properties
(Afyon Kocatepe Üniversitesi, 31.03.2019)In this study, some physicochemical, microbiological and sensorial properties of ice cream produced with essential oils obtained from lemon (L), mandarin (M), and orange (P) peels at different ratios (0.1%, 0.3%, and 0.5%) ... -
Effects of La2O3 addition on the thermal stability of γ-Al2O3 gels
(Elsevier, 01.01.2004)The effects of La2O3 additions up to 5 wt.% on the thermal stabilities of sol-gel derived alumina gels were studied. Observations were made on pore size, total pore area, phase changes at various sintering temperatures ... -
Electrokinetic properties of clinoptilolite with mono- and multivalent electrolytes
(Elsevier, 09.09.2002)In this study, electrokinetic properties of clinoptilolite have been determined. A series of systematic zeta potential measurements have been performed to determine the isoelectric point (iep) and potential determining ...