Ara
Toplam kayıt 33, listelenen: 1-10
The effect of voltage on the arc stud welding of microwave sintered Fe+Al powder mixture
(2014)
The joining of powder metallurgy products is of importance because of high demand in many
industrial applications. In this study, the effect of welding voltage on the joint quality has been
investigated using discharge ...
Investigation of corrosion and wear behavior of borided AISI P20 steel in micro-wave furnace
(IOP Publishing, 2019)
In this study, the effect of microwave boronizing treatment on the corrosion and wear behaviour of boride layer formed on AISI P20 steel have been investigated. The boronizing treatment was carried out using Ekabor-II ...
The effects of boro-tempering heat treatment on microstructural properties of ductile iron
(Elsevier, March 2011)
In this study, the effects of boro-tempering heat treatment on microstructural properties of ductile iron were investigated. Test samples with dimensions of 10 × 10 × 55 mm were boronized at 900 °C for 1, 3 and 5 h and ...
Investigation of diffusion kinetics of borided AISI P20 steel in micro-wave furnace
(Elsevier, 2015)
In present study, kinetics of borides formed on AISI P20 steel has been investigated by boronizing treatment which was carried out in Ekabor-II powders at the process temperatures of 1123, 1173 and 1223 K for 2, 4 and 6 h ...
Joining of microwave sintered Fe-26Al, Fe-30Al, Fe-26Al-14Ti and Fe-30Al-14Ti powder mixtures by diffusion bonding using Cu interlayer [Mikrodalga ile sinterlenmiş Fe-26Al, Fe-30Al, Fe-26Al-14Ti ve Fe-30Al-14Ti toz karişimlarinin Cu aratabakali difüzyon kaynaǧi ile birleştirilmesi]
(Gazi Üniv. Müh. Mim. Fak. Der., 2012)
Bu çalışmada, mikrodalga sinterleme yöntemi ile 550 ○C de 1 saat süreyle sinterlenmiş Fe-26Al, Fe-30Al, Fe-26Al-14Ti ve Fe-30Al-14Ti toz karışımlarının, elektrolitik bakır aratabaka kullanılarak difüzyon kaynağı
yöntemiyle ...
Investigation of the diffusion kinetics of borided stainless steels
(Springer, December 2)
In this study, the kinetics of borides formed on AISI 420, AISI 304 and AISI 304L stainless steels was investigated. Boronizing treatment was carried out using Ekabor-II powders at the processing temperatures of 1123, 1173 ...
Investigation of electrochemical corrosion behavior in a 3.5wt.% NaCl solution of boronized dual-phase steel
(Elsevier, April 2013)
In this study, corrosion behaviors of boronized and non-boronized dual-phase steel were investigated
with Tafel extrapolation and linear polarization methods in a 3.5 wt.% NaCl solution. Microstructure analyses show that ...
Investigation of wear and adhesion behaviors of borided steels
(Springer, 2016)
In this study, AISI P20, H13 and D2 steels were pack borided at 900 and 950 °C for retention times of 2, 4 and 6 h. The boride layer thickness values changed depending on the chemical composition of the steels. The hardness ...
Investigation of tribological behaviour of plasma paste boronized of AISI 8620, 52100 and 440C steels
(Niscair, 2011)
In the present study, AISI 8620, 52100 and 440C steels were plasma paste boronized (PPB) by using 100% borax paste. PPB process was carried out in a dc plasma system at temperature of 700 and 800 °C for 3 and 5 h in a gas ...
Corrosion and wear behaviors of boronized AISI 316L stainless steel
(Springer, 2013)
In this study, the effects of a boronizing treatment on the corrosion and wear behaviors of AISI 316L austenitic stainless steel (AISI 316L) were examined. The corrosion behavior of the boronized samples was studied via ...