Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorKarabulut, Abdurrahman
dc.contributor.authorBaksan, Bedri
dc.contributor.authorTorun, Osman
dc.contributor.authorÇelikyürek, İbrahim
dc.date.accessioned2020-02-14T14:05:51Z
dc.date.available2020-02-14T14:05:51Z
dc.date.issuedNisan 2008en_US
dc.identifier.urihttps://hdl.handle.net/11630/8289
dc.description.abstractDiffusion bonding of AZ91 alloy with a silver interlayer was carried out at 480C for different times under 1 MPa in a vacuum of 2x10^-3Pa. Shear test was applied to measure the shear strengths of the joints in the room temperature. The shear strength values of all bonded samples were found around 65–70 MPa. SEM–EDS studies indicated that the melting occurred along the interface of bonded samples as a result of transfer of atoms between the interlayer and the matrix during bonding. XRD results confirmed that the interlayer dissolved in the interface of joints. Investigations of the fracture surfaces showed that a good bonding was obtained by plastic deformation.en_US
dc.description.sponsorshipBAPKen_US
dc.language.isoengen_US
dc.identifier.doi10.1016/j.matdes.2008.04.003
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectMalzeme Bilimi,A. Non-ferrous metals and alloys; D. Bonding; G. Scanning electron microscopyen_US
dc.titleDiffusion bonding of AZ91 using a silver interlayeren_US
dc.typearticleen_US
dc.relation.journalMaterials and Desingen_US
dc.departmentTeknoloji Fakültesien_US
dc.authorid0000-0002-7663-2579en_US
dc.identifier.volume29en_US
dc.identifier.startpage2043en_US
dc.identifier.endpage2046en_US
dc.identifier.issue1en_US
dc.relation.publicationcategoryMakale - Uluslararası - Editör Denetimli Dergien_US
dc.contributor.institutionauthorKarabulut, Abdurrahman
dc.contributor.institutionauthorBaksan, Bedri
dc.contributor.institutionauthorTorun, Osman
dc.contributor.institutionauthorÇelikyürek, İbrahim


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster