Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorEren, Elif
dc.contributor.authorBayer Öztürk, Zahide
dc.contributor.authorKurama, Semra
dc.date2014-11-27
dc.date.accessioned2014-11-27T09:33:50Z
dc.date.available2014-11-27T09:33:50Z
dc.date.issued2014
dc.identifier.issn2147-5296
dc.identifier.urihttp://hdl.handle.net/11630/1067
dc.description.abstractThe physical properties of materials provide some of the most fundamental information regarding the material characterization. Porosity is one of the physical properties which affects the unit density, water absorption, strength, heat and sound insulation of materials. In this study, porcelain tiles with different thickness were sintered at same temperature, after that the cross-section of tiles were inspected with Scanning Electron Microscope (SEM). The porosity percentage and pore size of tiles from SEM images was calculated by using Scandium Image Analysis software. The aspect ratio of pores analyzed using Fiji Image Analyses Program. The minimum porosity percentage was achieved at average thickness. These porosity results were compared with total porosity percentage measured with He pycnometer. The highest percent of spherical pore (aspect ratio equals to 1) was found at the highest thickness but the smallest pore percentage found at the lowest thickness. It was found that the image analysis programs were effective tools for material characterization.en_US
dc.language.isoengen_US
dc.publisherAfyon Kocatepe Üniversitesien_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectPorosityen_US
dc.subjectImage Analysesen_US
dc.subjectScanning Electron Microscopeen_US
dc.subjectMicrostructureen_US
dc.titleImage Analyses for Porosity Characterization of Porcelain Tiles with Different Thicknessen_US
dc.title.alternativeFarklı Kalınlıklardaki Porselen Karoların Gözenek Karakterizasyonu için Görüntü Analizi Programlarının Kullanılmasıen_US
dc.typearticleen_US
dc.relation.journalFen Bilimleri Dergisien_US
dc.departmentNevsehir University, Department of Ceramic and Glass Design, Hacibektas, Nevsehir, Turkey Anadolu University, Department of Materials Science and Engineering, Eskisehir, Turkeyen_US
dc.identifier.volume14en_US
dc.identifier.startpage147en_US
dc.identifier.endpage151en_US
dc.identifier.issueÖzel Sayıen_US
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Yayınıen_US


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster