Yayın tarihi için Mühendislik Fakültesi listeleme
Toplam kayıt 83, listelenen: 21-40
-
Uptake of aniline and nitrobenzene from aqueous solution by organo-zeolite
(Environmental Technology, 06.04.2004)Adsorption mechanisms of toxic non-ionic organic contaminants (NOCs), aniline and nitrobenzene, with natural-zeolite andorgano-zeolite (OZ) were investigated in both batch and continuous systems. In batch tests, the ... -
Electrokinetic properties of clinoptilolite with mono- and multivalent electrolytes
(Elsevier, 09.09.2002)In this study, electrokinetic properties of clinoptilolite have been determined. A series of systematic zeta potential measurements have been performed to determine the isoelectric point (iep) and potential determining ... -
Investigation of the production and mechanical properties of silicon carbide-reinforced composites
(Iğdır üniversitesi, 09.2019)In this study, it was aimed to produce an intermetallic with low energy cost and better mechanical and physical properties with the microwave sintering method. Cupper matrix composites containing 4,8,12,16, and 20%SiC were ... -
Petrographic observations for rocks used in the Urartu centers in Van region
(TMMOB Jeoloji Mühendisleri Odası, 10.04.2017)Urartu Krallığına ait yerleşimler, Van Gölü Havzası’nda Paleozoik yaşlı mermer türü temel kayaçlarından Kuvaterner yaşlı bazaltik kayaçlara kadar oldukça zengin bir kayaç grubu üzerinde yer almaktadır. Urartu kalelerinde ... -
Ti-Cr-Co kompozit malzemelerin poisson oranı, sertliği ve elastik modülleri arasındaki korelasyon
(Afyon Kocatepe Üniversitesi, 10.09.2019)Çalışma, Ti-Cr-Cokompozit malzemelerin ultrasonik özelliklerini araştırmayı amaçlamaktadır. Deneysel olarak üretilen ve literatürden toplanan verilere dayanarak, Ti-Cr-Cokompozit numuneleri için Young modülü, Kayma Modülü ... -
Cu-SiC kompozitlerin mekanik özelliklerinin ultrasonik kullanılarak karakterizasyonu
(Afyon Kocatepe Üniversitesi, 10.09.2019)In this study, the effect of SiC reinforcement on the mechanical, physical properties and microstructure of copper matrix composite contact material was investigated with ultrasonic measurements. The composite materials ... -
The effect of BaCO3 addition on the sintering behavior of lignite coal fly ash
(Elsevier, 11.04.2008)The effect of BaCO 3 (witherite) addition on the sintering behavior of lignite coal fly ash taken from the Seyitömer power plant of Kütahya/Turkey was examined at temperatures of 1100, 1150 and 1200 C in air atmosphere. ... -
Characterization of acidic pumice and determination of its electrokinetic properties in water
(Elsevier, 12.09.2009)In this study some characterization tests of acidic pumice were performed using various techniques such as Mercury Intrusion Porosimetry (MIP), Scanning Electron Microscope (SEM), X-Ray Diffraction (XRD), Thermal Analysis ... -
Assessment of mechanical properties in Portland cement by optical microscopy and numerical color analysis
(IV. International Ceramic, Glass, Porcelain, Enamel, Glaze and Pigment Congress, 12.10.2018)Cement industry has an production output of clinker which directly affects the quality of cement. Different raw materials preferred and furnace conditions followed have an essential impact on clinker and cement ... -
Investigation of technical properties in bricks by using color image analysis
(IV. International Ceramic, Glass, Porcelain, Enamel, Glaze and Pigment Congress, 12.10.2018)Bricks, as one of terra cotta based construction materials have a large production capacities in Afyonkarahisar/Turkey industry. Continuous improvements either in raw materials or manufacturing conditions take great ... -
Production of Foam Glass by Waste Glass and Boron Mineral
(International Symposium on Boron 2019, 13.04.2019)In this study, a foam glass material was produced by using green container glass waste as main component, quartz mining tailings for compositional adjustment, marble powder as a source of CaCO3 for foaming agent and ... -
Mineralogical and physicochemical properties of talc from Emirdaǧ, Afyonkarahisar, Turkey
(Turkish Journal of Earth Sciences, 13.06.2013)Lens-shaped talc deposits related to Mesozoic gabbroic rocks are exposed in an area of 2 km , about 80 km northwest of Afyonkarahisar (western Anatolia). Different alteration zones in talc deposits were determined depending ... -
Cam partikül takviyeli alüminyum matrisli kompozitlerin mikrodalga sinterleme yöntemi ile üretimi
(Afyon Kocatepe Üniversitesi, 13.07.2019)Bu çalışmada, %0-20 atık cam tozları içeren aluminyum kompozit numuneler üretilmiştir. Farklı oranlarda cam tozu takviyesi içeren karışımlar yüksek devirli bilyeli öğütme işlemine maruz bırakıldıktan sonra tek eksenli ... -
Afyonkarahisar ilinde yetiştirilen yerli kazlarda cinsiyet ve yaşın karkas özellikleri üzerine etkisi
(Afyon Kocatepe Üniversitesi, 15.06.2020)Bu çalışmada Afyonkarahisar ilinde yetiştirilen kazlarda cinsiyet ve yaşın karkas özellikleri üzerine etkisi tespit edilmeye çalışılmıştır. Afyonkarahisar ilinde yetiştirilen kazlardan 8-9 aylık, 19-20 aylık yaşta ve her ... -
Fabrication of foamed glass by valorization of ferrochromium slags and flint container glass waste
(International Symposium on Innovations in Civil Engineering and Technology, 16.12.2019)Ferrochromium processes generate a vast quantity of ferrochromium slags which are accumulated in landfills. Not only economical uselessness but also detrimental environmental effects occur due to the accumulation of these ... -
Turbidity removal from wastewaters of natural stone processing by coagulation/flocculation methods
(WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, 17.04.2009)The effectiveness of coagulation (at pH values of 6, 7.5, and 9), flocculation (at pH 9), and coagulation plus flocculation (at pH 9) on turbidity removal from natural stone (travertine) processing wastewaters (NSPW) ... -
Afyonkarahisar bölgesi mermer parça atıklarının beton agregası olarak değerlendirilebilirliğinin araştırılması
(El-Cezerî Journal of Science and Engineering, 17.07.2019)Bu çalışmada, Afyonkarahisar organize sanayi bölgesinden temin edilen parça mermer atıklarının “TS 706 EN 12620 + A1 “Beton Agregaları” standardına uygunluğu araştırılmıştır. Atık sahasından alınan parça numuneler ... -
Effect of mixing water types on the timedependent zeta potential of Portland cement paste
(De Gruyter, 18.03.2013)The measurement of zeta potential (ZP) has important applications in a wide range of industries including ceramics, pharmaceuticals, medicine, mineral processing, electronics, cement industry and water treatment. It ... -
Investigation of equilibrium, kinetic, thermodynamic and mechanism of basic blue 16 adsorption by montmorillonitic clay
(Springer, 20.02.2013)The adsorption of a cationic dye, Basic Blue 16 (BB16), by montmorillonitic clay was studied in detail. Changes in the molecular structure during adsorption were analyzed by FTIR spectroscopy. BB16 adsorption onto ... -
On the design of an intelligent battery charge controller for PV panels
(EMaTTech Journals, 2012)The electricity generations of photo voltaic (PV) panels are strongly related with insolation and temperature. The insolation and temperature are not stable, since the electricity generations of the PV panels are not stable. ...