Ara
Toplam kayıt 72, listelenen: 51-60
Influence of dry grinding on physicochemical and surface properties of talc
(Oficyna Wydawnicza Politechniki Wrocławskiej, 01.02.2017)
In this study the effect of dry grinding on hydrophobicity, surface free energy (SFE), particle size distribution, surface area, porosity, oil absorption, and whiteness of talc was investigated. The dry grinding was performed ...
Saf C S fazının zamana bağlı zeta potansiyel (ZP) değişimi ile hidratasyon davranışı (prizlenme) arasındaki ilişki 3
(Afyon Kocatepe Üniversitesi, 01.12.2014)
Bu çalışmada, gerçek şartlar altında (su/çimento(w/c) oranı: 0.5) normal portland çimentosunun (PÇ) saf
C3S(3CaO.2SiO
) klinker fazının zamana bağlı zeta potansiyel (ZP) ölçümleri yapılmıştır. Elde edilen ZP
eğrileri, ...
Characterization of acidic pumice and determination of its electrokinetic properties in water
(Elsevier, 12.09.2009)
In this study some characterization tests of acidic pumice were performed using various techniques such as
Mercury Intrusion Porosimetry (MIP), Scanning Electron Microscope (SEM), X-Ray Diffraction (XRD),
Thermal Analysis ...
Turbidity removal from wastewaters of natural stone processing by coagulation/flocculation methods
(WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, 17.04.2009)
The effectiveness of coagulation (at pH values of 6, 7.5, and 9), flocculation (at pH 9),
and coagulation plus flocculation (at pH 9) on turbidity removal from natural stone
(travertine) processing wastewaters (NSPW) ...
Lavvar tesisi tikiner atığından kömürün geri kazanımı
(Dicle Üniversitesi, 01.02.2019)
Yeraltı kaynaklarımızın hızla tükendiği bugünlerde yerli kömür ihtiyacımız da hızla artmaktadır. Bu yüzden yıkama tesislerinde yıkama verimlerini maksimum seviyelere çıkarmak gerekmektedir. Bazı durumlarda ise tesis ...
Determining properties of nickel based composite that reinforced by electroless nicel plated boron nitride and astaloy-CrM powders
(Eskişehir Teknik Üniversitesi, 31.03.2020)
Industrial development brings with it the need for new materials every day. When it comes to
obtaining more than one feature together, composite materials are at the forefront of the material
groups. In composite ...
Design and implementation of p&o maximum power point tracker algorithm based solar charge controller
(International journal of applied mathematics, electronics and computers, 30.06.2019)
Solar energy is one of the main sources of renewable energy. In photovoltaic systems, energy is obtained from photovoltaic batteries. In photovoltaic batteries, the current and voltage do not increase linearly. This causes ...
Investigation of the production and mechanical properties of silicon carbide-reinforced composites
(Iğdır üniversitesi, 09.2019)
In this study, it was aimed to produce an intermetallic with low energy cost and better mechanical and physical properties with the microwave sintering method. Cupper matrix composites containing 4,8,12,16, and 20%SiC were ...
Investigation of mechanical properties of boronized composites produced by electroless Ni coating
(Journal of Mineral, Metal and Material Engineering, 23.04.2020)
In this study, ceramic-metal composite production and characterization have been made in order to increase the service life of plotter tools used in soil industry. In the study Ni coated (36% AlN + 3% WC) powders were ...
Sintering and characterization of SiC reinforced Ni powders in microwave furnace
(International journal of engineering research and development, 28.01.2020)
In this study, SiC reinforced nickel matrix composites, microwave at different temperatures It is produced by sintering in oven. Nickel deposition on SiC powders was achieved by using electroless nickel plating technique. ...