Makaleler
https://hdl.handle.net/11630/6636
Makale, olgu sunumu, editöre mektup vb.2024-03-29T02:36:39ZAlgılayıcı türlerinin güneş takip sisteminde etkinliğinin araştırılması
https://hdl.handle.net/11630/9866
Algılayıcı türlerinin güneş takip sisteminde etkinliğinin araştırılması
Gürsoy, Tuğba; Yönetken, Ahmet
Teknolojinin gelişmesi, enerjiye olan talep gün geçtikçe artmaktadır. Fosil yakıtların sınırlı olması alternatif enerji kaynakları aramaya teşvik etmektedir. Yenilenebilir enerji kaynakları kullanımı artan enerji talebini karşılamada önemli bir yere sahiptir. Güneş enerji teknolojileri günümüzde sıkça kullanılmaya başlanmıştır. Güneş enerjisinden yüksek verimlilikle güç elde etmede güneş takip sistemleri gündeme gelmektedir. Bu çalışmada Güneş takip sistemleri çift eksenli olarak tasarlanmıştır. Güneş panelleri aynı teknik özelliklere sahiptir. Güneş panellerine üzerine üç farklı tip algılayıcı yerleştirilmiştir. Algılayıcı türlerinin aynı tip enerji üretimine olan performansları karşılaştırılmıştır. Sistemin sabit ve hareketli konumda belirli aralıklarla gerilim ve akım değerleri ölçülmüştür. Elde edilen verilere göre güneş panellerinin sabit ve hareketli konumda toplam üretimleri karşılaştırıldığında hareketli konumda sabit
konuma göre; LilyPad Işık Sensörlü sistemde %36,68 oranında, SMD Sensörlü sistemde %38,42 ve LDR’li sistemde %43,58 oranında artış görülmüştür; The scope of the present study is to investigate the change of ultrasonic velocity with the physical and mechanical properties of Ni-TiWC composites. Since the materials used in the aerospace and automotive industries are exposed to high temperatures, friction andhigh stresses, the need for metal matrix composite materials used in manufacturing applications such as cutting discs and inserts hasincreased rapidly. Ni-Ti metal matrix composites reinforced with WC were circularly shaped in uniaxial hydraulic press. A mixture of30% Ni, 2% Ti and 68% WC powders was sintered at 1000°C-1400°C with argon atmosphere in a tube furnace and were fabricatedby electroless plating technique. XRD (X-Ray diffraction), SEM (Scanning Electron Microscope), compressive testing, hardness andultrasonic velocity measurements were employed to investigated the mechanical and physical properties of specimens. Experimentalresults showed that ultrasound velocity values increased polynomial linearly with increasing sintering temperature. In addition, thefact that the highest sintering temperature resulted in 429.1HV hardness at 1400°C is an indication that the structure has become morerobust and compact. The change in ultrasonic velocities with the increase in sintering temperature is proof that the bonding in thestructure is better and the particle growth is well achieved.
0001-01-01T00:00:00ZGüneş ışınım tahmininde NARX modelinin uygulanması
https://hdl.handle.net/11630/8700
Güneş ışınım tahmininde NARX modelinin uygulanması
Sarı, Ali; Aktaş, Muzaffer; Yönetken, Ahmet; Doğan, Rasim
There is a transition from fossil fuels to renewable energy without resource constraints in electrical energy production. The most important of these resources is solar energy. The energy produced by solar panels is directly related to the amount of solar radiation. For this reason, solar radiation estimation provides the economical use of other energy sources, knowing the energy needed to meet the demand for the amount of energy to be produced. It is very important to know the demand forecast in advance in energy production. Many methods are used in energy demand forecasting. In this study, the prediction of solar radiation in cases where temperature, humidity and precipitation data are variable by using NARX prediction model has been examined. For this, measurements taken from the borders of Ankara province were used. The simulation results are given in tables and researched.; Elektrik enerjisi üretiminde Fosil yakıtlardan, kaynak sıkıntısı olmayan yenilenebilir enerjiye doğru bir geçiş söz konusudur. Bu kaynaklardan en önemlisi güneş enerjisidir. Güneş panellerinden üretilen enerji ise güneş ışınım miktarıyla doğrudan bağıntılıdır. Bu sebeple güneş ışınım tahmini, üretilecek enerji miktarının talebi karşılamada gereksinim duyulan enerjinin bilinmesi, diğer enerji kaynaklarının ekonomik kullanımını sağlar. Enerji üretiminde talep tahmininin önceden bilinmesi büyük önem taşımaktadır. Enerji talep tahmininde birçok yöntem kullanılmaktadır. Bu çalışmada NARX tahmin modeli kullanılarak sıcaklık, nem ve yağış verilerinin değişken olduğu durumlarında güneş ışınımının tahmini incelenmiştir. Bunun için Ankara ili sınırlarından alınan ölçümler kullanılmıştır. Simülasyon sonuçları tablolar halinde verilerek araştırılması yapılmıştır.
2021-01-01T00:00:00ZInvestigation of mechanical properties of boronized composites produced by electroless Ni coating
https://hdl.handle.net/11630/8412
Investigation of mechanical properties of boronized composites produced by electroless Ni coating
Yönetken, Ahmet; Erol, Ayhan
In this study, ceramic-metal composite production and characterization have been made in order to increase the service life of plotter tools used in soil industry. In the study Ni coated (36% AlN + 3% WC) powders were circularly shaped in uniaxial hydraulic press. These samples were sintered at 1000-1100-1200-1300-1400 °C with argon atmosphere in conventional furnaces. The highest hardness value of 112.9 Hv was obtained in the composite samples (36%AlN + 3%WC) at 1400 °C. Powder metallurgy was applied to ceramic-metal composites by using box boring in dry air atmosphere at 950 °C for 4 hours. The samples were characterized by mechanical and metallographic examination. After box boronization, hardness values were measured, their densities were calculated, the current phases were determined by X-ray diffraction (XRD) method and microstructures were examined by scanning electron microscopy
(SEM). The highest hardness value of 1150.80 Hv was sintered at 1400 ° C and 61% Ni was obtained in the box boron
composite sample (36% AlN + 3% WC). Better mechanical and metallographic results were obtained from the samples by using box boring method. The porosity decreased in the microstructure examination of the sample. Considering the advantages of non-electric Ni coating method in sintering, it can be said that improving mechanical properties is a good method. Boronizing process was effective in reducing surface porosity and increasing surface hardness up to 10 times.
0023-01-01T00:00:00ZAfyonkarahisar ilinde yetiştirilen yerli kazlarda cinsiyet ve yaşın karkas özellikleri üzerine etkisi
https://hdl.handle.net/11630/8386
Afyonkarahisar ilinde yetiştirilen yerli kazlarda cinsiyet ve yaşın karkas özellikleri üzerine etkisi
Peşmen, Günnur; Yönetken, Ahmet
Bu çalışmada Afyonkarahisar ilinde yetiştirilen kazlarda cinsiyet ve yaşın karkas özellikleri üzerine etkisi
tespit edilmeye çalışılmıştır. Afyonkarahisar ilinde yetiştirilen kazlardan 8-9 aylık, 19-20 aylık yaşta ve
her yaş grubundan 12 erkek ve 12 dişi kaz kesilerek kesim ve karkas özellikleri belirlenmiştir. İncelenen
özelliklerden kesim öncesi canlı ağırlık 8-9 aylık ve 19-20 aylık yaştaki erkek ve dişi kazlar için sırasıyla;
4.08±0.49 kg ve 4.49±0.56 kg, 4.57±0.25 kg ve 4.00±0.64 kg; sıcak karkas ağırlığı, 2.59±0.38 kg ve
2.82±0.38 kg, 2.93±0.2 kg ve 2.48±0.41 kg; soğuk karkas ağırlığı, 2.51±0.4 kg ve 2.81±0.35 kg, 2.86±0.26
kg ve 2.46±0.42 kg olarak belirlenmiştir. 19-20 aylık yaştaki kazlarda canlı ağırlık, abdominal yağ, soğuk
karkas, boyun, kanat, sırt ağırlığı ortalamaları 8-9 aylık yaştaki kazlardan yüksek ve istatistiki olarak
önemli bulunmuştur (p<0.01, p<0.05). Erkek kazların canlı ağırlık, baş, sıcak karkas, soğuk karkas, boyun,
göğüs ve sırt ağırlığı ortalamaları dişi kazlardan yüksek ve istatistiki olarak önemli bulunmuştur (p<0.01,
p<0.05). Elde edilen sonuçlara göre, Afyonkarahisar ilindeki yerli kazların besi için uygun olabileceği
sonucuna varılmıştır. Bu çalışmanın amacı; kaz etinin tüketiciler arasında tercih edilebilir bir protein
kaynağı olmasını sağlamak üzere, bu alanda yapılan sınırlı sayıdaki bilimsel çalışmalara katkı sağlamaktır.; In this study, the effect of sex and age on carcass characteristics of geese reared in Afyonkarahisar
province was determined. 12 male and 12 female geese of 8-9 months old, 19-20 months old and all
age groups were slaughter and carcass characteristics were determined. The live weight of preslaughtered male and female geese were 8-9 months old and 19-20 months old, respectively; 4.08 ±
0.49 kg and 4.49 ± 0.56 kg, 4.57 ± 0.25 kg and 4.00 ± 0.64 kg; hot carcass weight, 2.59 ± 0.38 kg and 2.82
± 0.38 kg, 2.93 ± 0.2 kg and 2.48 ± 0.41 kg; cold carcass weight was determined as 2.51 ± 0.4 kg and
2.81 ± 0.35 kg, 2.86 ± 0.26 kg and 2.46 ± 0.42 kg. In 19-20 month old geese, live weight, abdominal fat,
cold carcass, neck, wing, back weight were found to be higher than the geese of 8-9 month age and
statistically significant (p <0.01, p <0.05). The average body weight, head, warm carcass, cold carcass,
neck, chest and back weight of male geese were higher than female geese and were statistically
significant (p <0.01, p <0.05). The obtained data showed that local geese in the region may be suitable
for fattening in terms of slaughter and carcass characteristics. The aim of this study is to contribute to a
limited number of scientific studies in this field in order to make goose meat a preferable source of
protein among consumers.
0015-01-01T00:00:00Z