Yayın tarihi için Makaleler listeleme
Toplam kayıt 33, listelenen: 21-33
-
Investigation of wear and adhesion behaviors of borided steels
(Springer, 2016)In this study, AISI P20, H13 and D2 steels were pack borided at 900 and 950 °C for retention times of 2, 4 and 6 h. The boride layer thickness values changed depending on the chemical composition of the steels. The hardness ... -
Investigation of Corrosion Behaviours Hydroxyapatite (HAP) coated Ti6Al4V Implants by Using Electrochemical Deposition Method
(2018)In this research, hydroxyapatite (HAP) has been coated on the Ti6A14V alloy surface by electrophoresis method. In this electrophoresis method, NH4H2PO4 is taken as P precursor and Ca (NO3)2.4H2O is taken as Ca precursor ... -
Investigation of corrosion and wear behavior of borided AISI P20 steel in micro-wave furnace
(IOP Publishing, 2019)In this study, the effect of microwave boronizing treatment on the corrosion and wear behaviour of boride layer formed on AISI P20 steel have been investigated. The boronizing treatment was carried out using Ekabor-II ... -
Borlanmış sementasyon çeliğinin tribolojik özelliklerinin incelenmesi
(El-Cezerî Fen ve Mühendislik Dergisi, 2019)Bu çalışmada farklı B2O3/SiC/B4C pasta karışımlarında plazma pasta borlanmış sementasyon çeliğinin yüksek yük altındaki aşınma davranışları inceleniştir. Plazma borlama işlemi vakum altında 10 mbar işlem basıncında, H2 ve ... -
%3,0 Mg içeren borlanmış Co-Mg alaşımının yüzey özelliklerinin incelenmesi
(El-Cezerî Fen ve Mühendislik Dergisi, 2019)Bu çalışmada, %97 Co ve %3 Mg içeren Co-Mg alaşımına borlama işlemi gerçekleştirilmiştir. Co-Mg alaşım malzemesini üretmek için toz metalurjisi (TM) yöntemi kullanılmıştır. Bu yöntemde, Co ve Mg metal tozları kapalı ... -
Electrochemical corrosion behavior of high velocity Oxy-Fuel (HVOF) superalloy coatings on ductile irons
(Sakarya University Journal of Science, 2019)In this study, alloyed and unalloyed ductile irons (DI) were coated with two different Ni-based superalloy materials by HVOF method. Microstructure and phase analyzes of the coatings were performed by using SEM, EDX, XRD ... -
How improved to WC based hard materials
(Erzincan University, 31.12.2019)Tungsten carbide is known to have excellent corrosion resistance and high hardness within carbide ceramics. Due to their superior mechanical properties and wear resistance, tungsten carbide cutting tools containing Co ... -
Investigation of electrochemical corrosion behavior in a 3.5wt.% NaCl solution of boronized dual-phase steel
(Elsevier, April 2013)In this study, corrosion behaviors of boronized and non-boronized dual-phase steel were investigated with Tafel extrapolation and linear polarization methods in a 3.5 wt.% NaCl solution. Microstructure analyses show that ... -
Investigation of the diffusion kinetics of borided stainless steels
(Springer, December 2)In this study, the kinetics of borides formed on AISI 420, AISI 304 and AISI 304L stainless steels was investigated. Boronizing treatment was carried out using Ekabor-II powders at the processing temperatures of 1123, 1173 ... -
The effects of boro-tempering heat treatment on microstructural properties of ductile iron
(Elsevier, March 2011)In this study, the effects of boro-tempering heat treatment on microstructural properties of ductile iron were investigated. Test samples with dimensions of 10 × 10 × 55 mm were boronized at 900 °C for 1, 3 and 5 h and ... -
Corrosion behavior of boro-tempered ductile iron
(Springer, May 2010)In this study, the effect of boro-tempering heat treatment on the microstructure and corrosion behavior of unalloyed ductile iron was investigated. The corrosion characteristics of ductile iron have been determined by ... -
Investigation of corrosion behaviors at different solutions of boronized AISI 316L stainless steel
(Springer, May 2013)In this study, corrosion behaviors of boronized and non-boronized AISI 316L stainless steel (AISI 316L SS) were investigated with Tafel extrapolation and linear polarization methods in different solutions (1 mol dm−3 HCl, ... -
The corrosion and wear behavior of TiN and TiAlN coated AISI 316 L stainless steel
(Springer, May 2014)In this study, TiN and TiAlN coatings were deposited on AISI 316 L stainless steel substrates by PVD techniques. The composition and crystalline structure of the as-deposited coatings were analyzed by energy dispersive ...