Erişim şekli için "info:eu-repo/semantics/openAccess" Makaleler listeleme
Toplam kayıt 14, listelenen: 1-14
-
%3,0 Mg içeren borlanmış Co-Mg alaşımının yüzey özelliklerinin incelenmesi
(El-Cezerî Fen ve Mühendislik Dergisi, 2019)Bu çalışmada, %97 Co ve %3 Mg içeren Co-Mg alaşımına borlama işlemi gerçekleştirilmiştir. Co-Mg alaşım malzemesini üretmek için toz metalurjisi (TM) yöntemi kullanılmıştır. Bu yöntemde, Co ve Mg metal tozları kapalı ... -
Boride layer growth kinetics of the borided high alloyed steels
(Oxidation Communications, 2015)In this study, the case properties and diffusion kinetics of high alloyed cold work tool steel borided in Ekabor-2 powder were investigated by conducting a series of experi-ments at temperatures of 1123, 1173 and 1223 K ... -
Effect of N2 + H2 gas mixtures in plasma nitriding on tribological properties of duplex surface treated steels
(Elsevier, 2008)Thermo-reactive diffusion chromizing followed by pulsed plasma nitriding were carried out on AISI 52100 and 8620 bearing steels. The chromized samples were pulse-plasma nitrided for 5 h at 500 °C in various N2–H2 gas ... -
Effect of sliding speed on friction and wear behaviour of borided gear steels
(Journal of the Balkan Tribological Association, 2014)In this study, the wear behaviour of GS18NiMoCr36 (GS18), GS22NiMoCr56 (GS22) and GS32NiCrMo6.4 (GS32) gear steels borided in Ekabor-II powder was investigated by conducting a series of experiments at temperatures ... -
How improved to WC based hard materials
(Erzincan University, 31.12.2019)Tungsten carbide is known to have excellent corrosion resistance and high hardness within carbide ceramics. Due to their superior mechanical properties and wear resistance, tungsten carbide cutting tools containing Co ... -
Investigation of corrosion behavior of borided gear steels
(Springer, 2014)In this study, corrosion behaviors of GS18NiMoCr36 (GS 18) and GS32NiCrMo6.4 (GS 32) gear steels borided in Ekabor-II powder at the temperature of 950 °C for 2 and 6 h were investigated in a 6 % M HCI acid solution. The ... -
Investigation of Corrosion Behaviours Hydroxyapatite (HAP) coated Ti6Al4V Implants by Using Electrochemical Deposition Method
(2018)In this research, hydroxyapatite (HAP) has been coated on the Ti6A14V alloy surface by electrophoresis method. In this electrophoresis method, NH4H2PO4 is taken as P precursor and Ca (NO3)2.4H2O is taken as Ca precursor ... -
Investigation of diffusion kinetics of plasma paste borided AISI 8620 steel using a mixture of B2O3 paste and B4C/SiC
(Springer, 2013)In the present study, AISI 8620 steel was plasma paste borided by using various B2O3 paste mixture. The plasma paste boriding process was carried out in a dc plasma system at temperatures of 973, 1023 and 1073 K for 2, ... -
Investigation of surface properties and wear resistance of borided steels with different B4C mixtures
(Niscair, 2012)Boriding is a thermo-chemical surface hardening treatment applied to iron based materials. This treatment is performed by boron element diffusing into iron based materials at high temperatures. Wear resistance increases ... -
Kinetics of borided gear steels
(Springer, 2013)In this study, the case properties and diffusion kinetics of GS18NiMoCr36 (GS18), GS22NiMoCr56 (GS22) and GS32NiCrMo6.4 (GS32) gear steels borided in Ekabor-II powder were investigated by conducting a series of experiments ... -
Kinetics of plasma paste boronized AISI 8620 steel in borax paste mixtures
(Springer, 2013)In the present study, AISI 8620 steel was plasma paste boronized by using various borax paste mix tures. The plasma paste boronizing process was carried out in a dc plasma system at a temperature of 973, 1023 and 1073 K ... -
Plasma paste boronizing of AISI 8620, 52100 and 440C steels
(Elsevier, 2011)In the present study, AISI 8620, 52100 and 440C steels were plasma paste boronized (PPB) by using 100% borax paste. PPB process was carried out in a dc plasma system at temperature of 700 and 800 °C for 3 and 5 h in a gas ... -
Surface characterization of pack and plasma paste boronized of 21NiCrMo2 steel [Kutu ve plazma pasta borlanmiş 21NiCrMo2 çeliǧinin yüzey karekterizasyonu]
(Journal of the Faculty of Engineering and Architecture of Gazi University, 2012)In the present study, 21NiCrMo2 steel were plasma paste boronized by using 100 wt.% B2O3, 70 wt.% B2O3 + 30 wt. % SiC, 70 wt.% B2O3 + 30 wt.% B4C, 30 wt. % B2O3 + 70 wt.% SiC, 30 wt.% B2O3 + 70 wt.% B4C pastes. This steel ... -
Wear behaviour of plasma paste boronized of AISI 8620 steel with borax and B2O3 paste mixtures
(Elsevier, 2013)In the present study, AISI 8620 steel was plasma paste boronized (PPB) by using paste mixtures with different borax and B2O3 percentages. The PPB process was carried out in a DC plasma system at 973, 1023 and 1073 K for 5 ...