dc.contributor.author | Kayalı, Yusuf | |
dc.date.accessioned | 2019-12-20T06:17:38Z | |
dc.date.available | 2019-12-20T06:17:38Z | |
dc.date.issued | May 2014 | en_US |
dc.identifier.citation | Kayali, Yusuf. Protection of Metals and Physical Chemistry of Surfaces. The Corrosion and Wear Behavior of TiN and TiAlN Coated AISI 316 L Stainless Steel. (2014) 50: 412. | en_US |
dc.identifier.uri | https://link.springer.com/article/10.1134/S207020511403006X | |
dc.identifier.uri | https://doi.org/10.1134/S207020511403006X | |
dc.identifier.uri | https://hdl.handle.net/11630/7551 | |
dc.description.abstract | In this study, TiN and TiAlN coatings were deposited on AISI 316 L stainless steel substrates by PVD techniques. The composition and crystalline structure of the as-deposited coatings were analyzed by energy dispersive X-ray analysis (EDX) and X-ray diffraction (XRD) methods, respectively. The corrosion resistance studies of TiN-coated and TiAlN-coated samples were carried out in 0.9 wt % NaCl and SBF solutions using the electrochemical potentiodynamic polarization method and the wear behavior was evaluated with the ball-on-disk wear method at a sliding speed rate of 0.3 m/s under 2.5 N load in a dry medium. It was found that both TiN and TiAlN coatings exhibited relatively good corrosion resistance, however, TiAlN coatings showed a better corrosion resistance than TiN coatings. The TiAlN coating contributes positively against corrosion and wear behavior by increasing the surface hardness and by decreasing the friction coefficient of AISI 316 L stainless steel, respectively. | en_US |
dc.language.iso | eng | en_US |
dc.publisher | Springer | en_US |
dc.identifier.doi | 10.1134/S207020511403006X | en_US |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | Friction Coefficient | en_US |
dc.subject | Wear Rate | en_US |
dc.subject | Simulated Bodily Fluid | en_US |
dc.subject | Wear Test | en_US |
dc.subject | Wear Track | en_US |
dc.title | The corrosion and wear behavior of TiN and TiAlN coated AISI 316 L stainless steel | en_US |
dc.type | article | en_US |
dc.relation.journal | Protection of Metals and Physical Chemistry of Surfaces | en_US |
dc.department | Afyon Kocatepe Üniversitesi, Teknoloji Fakültesi | en_US |
dc.authorid | 0000-0002-2449-7125 | en_US |
dc.identifier.volume | 50 | en_US |
dc.identifier.startpage | 412 | en_US |
dc.identifier.endpage | 419 | en_US |
dc.identifier.issue | 3 | en_US |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |
dc.contributor.institutionauthor | Kayalı, Yusuf | |