0.22 LR tüfeklerde fişek yatağı yapısının boş kovan çıkarmama hatası üzerindeki etkisinin incelenmesi
Künye
Ünal, E. (2025). 0.22 LR Tüfeklerde Fişek Yatağı Yapısının Boş Kovan Çıkarmama Hatası Üzerindeki Etkisinin İncelenmesi. Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi, 25(1), 196-205. https://doi.org/10.35414/akufemubid.1499421Özet
Yivli tüfeklerde, silahın işleyişini etkileyen temel parçaların tasarımından kaynaklanan birçok hata meydana gelebilir. Mekanizma, namlu, şarjör gibi temel parçalar, silah sisteminin temelini oluşturur ve hataların kök sebeplerini etkileyen unsurlardır. Silah sistemlerinde, namlunun fişek yatağı kısmı, ateşlemenin gerçekleştiği kısımdır ve bu nedenle sistemin en kritik noktasını oluşturur. Silahların hatasız çalışabilmesi için fişek yatağı tasarımı oldukça önemlidir. Bu çalışma, 0.22 lr tüfeklerde fişek yatağı tasarımının boş kovan çıkarmama hatasına etkisini incelemek amacıyla sekiz farklı tipte namlu üretilmiş ve test edilmiştir. Yapılan testler sonucunda, fişek yatağı yapısının boş kovan çıkarmama hatası ile ilişkisi detaylı bir şekilde incelenmiştir. İnceleme sonucunda, mühimmatların yapısı ve fişek yatağının giriş kısmındaki radyüs veya pah işleminin boş kovan çıkarmama ve mermi sürememe hatasına etkisi olduğu görülmüştür. Ayrıca, fişek yatağındaki mermi ile namlu iç duvarı arasındaki boşluğun önemli olduğu belirlenmiştir. In rifled rifles, various errors can occur due to the design of the main components affecting the firearm's operation. Mechanism, barrel, and magazine are fundamental parts of the firearm system and are root causes of these errors. The chamber of the barrel, where ignition occurs, is the most critical part of the system. Therefore, the design of the chamber is crucial for the flawless functioning of firearms. This study aims to examine the effect of chamber design on the failure to extract empty cartridges in 0.22 LR rifles. To this end, eight different types of barrels were produced and tested. The tests thoroughly investigated the relationship between chamber structure and the failure to extract empty cartridges. The findings indicate that the structure of the ammunition and the radius or chamfer at the entrance of the chamber significantly affect the extraction failure and bullet feeding. Additionally, the gap between the bullet and the inner wall of the chamber was found to be crucial. Barrels without chamfers and radius exhibited higher error rates.
Kaynak
Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri DergisiCilt
25Sayı
1Bağlantı
https://dergipark.org.tr/tr/pub/akufemubid/issue/90175/1499421https://hdl.handle.net/11630/12453
Koleksiyonlar
- Cilt 25 : Sayı 1 [25]