Ara
Toplam kayıt 13, listelenen: 1-10
Investigation of wear behavior of borided dın x15crnisi25 steel
(20.03.2016)
In the present study, effect of the boriding process on adhesion and tribological properties of DIN
X15CrNiSi25 steel has been investigated. Boriding was performed in a solid medium consisting of Ekabor-
II powders at ...
Investigation of diffusion kinetics of borided x6cr17 steel
(20.03.2016)
In this study, the case properties and diffusion kinetics of DIN X6Cr17 steel borided in Ekabor-II
powder were investigated by conducting a series of experiments at temperatures of 1123, 1223 and 1323K
for 2, 4 and 6 h. ...
Mechanical proporties of a composite produced from electroless ni plated cr and ti powders
(15.06.2014)
Intermetallic materials such as NiTi, Ni3Cr2, CrTi are among advanced technology materials that have outstanding mechanical and physical properties for high temperature applications. Especially creep resistance, low density ...
Characterization of sintered %5ni-%48cr-%2ti powder mixtures containing intermetallics
(15.06.2014)
Intermetallic materials are among advanced technology materials that have outstanding mechanical and physical properties for high temperature applications. Especially creep resistance, low density and high hardness properties ...
Fabrication of ni metal matrix composites reinforced with sio2 by microwave sintering
(15.05.2009)
Nickel matrix reinforced with SiO2 has been manufactured
by microwave sintering at various temperatures. A uniform
nickel layer on SiO2 powders was deposited prior to
sintering using electroless plating technique, ...
Production of ni3al-fe composite and investigation of mechanical properties
(05.10.2011)
In intermetallics high resistance to creep and oxidation, high strenght, low density are desired properties. Sintering
process was used in this study by adding different amounts of Fe powder to Ni-Al powder mixture. When ...
Characterization and brazing of sintered Ni-Al-Co powder mixtures containing intermetallics
(28.08.2013)
Powder metallurgy is a progressive branch of
engineering that enables engineers to fabricate difficultto-
make parts and materials that are used in many industrial
areas. Joining this class of materials is a difficult ...
Production of Co-Cr-Ti composite and investigation of mechanical properties
(2014)
Intermetallic materials such as Co2Ti, Cr2Ti are
among advanced technology materials that have outstanding
mechanical and physical properties for high temperature
applications. Especially creep resistance, low density
and ...
Finite element modelling of edge radius effect in micro turning process
(ASET 2019, Mart 2019)
Micro-turning is very similar to conventional
turning, but is a cutting operation in which the tool geometry
effect is more important. For this reason, the cutting geometry
and cutting parameters used in micro turning ...
Production of ni3al-cr composite and investigation of mechanical properties
(Gazi University Journal of Science, 2011)
Nickel aluminide intermetallic compounds possess attractive properties that make them good candidates for
high temperature structural applications. It is known that Ni3Al intermetallics are commonly used in various
application ...