Ara
Toplam kayıt 10, listelenen: 1-10
Investigation of diffusion kinetics of borided AISI P20 steel in micro-wave furnace
(Elsevier, 2015)
In present study, kinetics of borides formed on AISI P20 steel has been investigated by boronizing treatment which was carried out in Ekabor-II powders at the process temperatures of 1123, 1173 and 1223 K for 2, 4 and 6 h ...
Investigation of wear and adhesion behaviors of borided steels
(Springer, 2016)
In this study, AISI P20, H13 and D2 steels were pack borided at 900 and 950 °C for retention times of 2, 4 and 6 h. The boride layer thickness values changed depending on the chemical composition of the steels. The hardness ...
Corrosion and wear behaviors of boronized AISI 316L stainless steel
(Springer, 2013)
In this study, the effects of a boronizing treatment on the corrosion and wear behaviors of AISI 316L austenitic stainless steel (AISI 316L) were examined. The corrosion behavior of the boronized samples was studied via ...
Adhesion and wear properties of boro-tempered ductile iron
(Elsevier, 2011)
In this study, adhesion and wear properties of boro-tempered ductile iron (BDI) were investigated. Boro-tempering was carried out on two stage processes i.e. boronizing and tempering. At the first stage, ductile iron samples ...
Wear and corrosion behaviour of borided and nitrided m2 high speed steel
(Journal of the Balkan Tribological Association, 2013)
Boriding and nitriding lead to improved tribological and corrosive properties of M2 high speed steel. Boronising treatment was carried out in Ekabor-II powders at the process temperature of 950 degrees C for 4 h. Gas ...
Diffusion kinetics of borided AISI 52100 and AISI 440C steels
(Elsevier, 2012)
In this study, the case properties and diffusion kinetics of AISI 440C and AISI 52100 steels borided in Ekabor-II powder were investigated by conducting a series of experiments at temperatures of 1123, 1173 and 1223 K for ...
Borlanmış sementasyon çeliğinin tribolojik özelliklerinin incelenmesi
(El-Cezerî Fen ve Mühendislik Dergisi, 2019)
Bu çalışmada farklı B2O3/SiC/B4C pasta karışımlarında plazma pasta borlanmış sementasyon çeliğinin yüksek yük altındaki aşınma davranışları inceleniştir. Plazma borlama işlemi vakum altında 10 mbar işlem basıncında, H2 ve ...
Investigation of mechanical properties of boro-tempered ductile iron
(Elsevier, 2010)
In this study, the effects of boro-tempering heat treatment on mechanical properties of ductile iron were investigated. Standard tensile test samples and unnotched Charpy specimens were boronized at 900 °C for 1, 3 and 5 ...
Analysis with taguchi method of wear behaviors of borided AISI 52100 steels
(Journal of The Balkan Tribological Association, 2013)
In this study, case properties and analysis of wear behaviour of borided AISI 52100 steel with the Taguchi method were investigated by conducting a series of experiments in Ekabor-II powders at process temperatures of 850, ...
Characterization and Rockwell-C adhesion properties of chromium-based borided steels
(Journal of Adhesion Science and Technology, 2015)
In this study, adhesion properties of boride layers formed on the surface of AISI 52100, AISI 5140, AISI 440C, AISI 420 and AISI 304 steels were investigated. Boronizing treatment was carried out in Ekabor-II powders at ...