Ara
Toplam kayıt 7, listelenen: 1-7
Corrosion behaviors of hydroxyapatite coated by electrodeposition method of Ti6Al4V, Ti and AISI 316L SS substrates
(Pleiades Publishing, Ltd, 2013)
Electrodeposition method was used to obtain hydroxyapatite (HAP) coatings on Ti6Al4V, Ti and AISI 316L SS substrates. Electrodeposition solution is prepared as Ca(NO3)2 ⋅ 4H2O and (NH4)H2PO4. Additionally, three different ...
The examination of Afyonkarahisar's geothermal system corrosion
(ASM International, 2013)
Corrosion and scaling of metal surfaces are the major problems caused by geothermal fluids when metallic structures are used. This article describes a study of corrosion and scaling problems in the Afyonkarahisar Geothermal ...
Experimental and statistical evaluation of cutting methods in relation to specific energy and rock properties
(Springer, 2013)
In a processing plant, natural stone can be cut by methods such as circular sawing (CS), frame sawing (FS), water jet cutting (WJC) and abrasive water jet cutting (AWJC). The efficiency of cutting systems can be compared ...
Corrosion and wear behaviors of boronized AISI 316L stainless steel
(Springer, 2013)
In this study, the effects of a boronizing treatment on the corrosion and wear behaviors of AISI 316L austenitic stainless steel (AISI 316L) were examined. The corrosion behavior of the boronized samples was studied via ...
Investigation of diffusion kinetics of plasma paste borided AISI 8620 steel using a mixture of B2O3 paste and B4C/SiC
(Springer, 2013)
In the present study, AISI 8620 steel was plasma paste borided by using
various B2O3 paste mixture. The plasma paste boriding process was carried out in a
dc plasma system at temperatures of 973, 1023 and 1073 K for 2, ...
Kinetics of borided gear steels
(Springer, 2013)
In this study, the case properties and diffusion kinetics of
GS18NiMoCr36 (GS18), GS22NiMoCr56 (GS22) and GS32NiCrMo6.4 (GS32) gear
steels borided in Ekabor-II powder were investigated by conducting a series of experiments ...
Wear behaviour of plasma paste boronized of AISI 8620 steel with borax and B2O3 paste mixtures
(Elsevier, 2013)
In the present study, AISI 8620 steel was plasma paste boronized (PPB) by using paste mixtures with different borax and B2O3 percentages. The PPB process was carried out in a DC plasma system at 973, 1023 and 1073 K for 5 ...