Ara
Toplam kayıt 21, listelenen: 11-20
Production of Co-Cr-Ti composite and investigation of mechanical properties
(2014)
Intermetallic materials such as Co2Ti, Cr2Ti are
among advanced technology materials that have outstanding
mechanical and physical properties for high temperature
applications. Especially creep resistance, low density
and ...
Production of Ni-Cr-Ti-natural fibres composite and investigation of mechanical properties
(2015 AIP Publishing LLC, 13.04.2015)
Intermetallic materials such as Ni2Ti, Cr2Ti are among advanced technology materials that have outstanding mechanical and physical properties for high temperature applications. Especially creep resistance, low density and ...
Diffusion bonding of electroless Ni plated WC composite to Cu and AISI 316 stainless steel
(2011)
In this study, a composite containing WC (Tungsten Carbide) and Ni was produced by two different processing routes. Electroless Ni coated WC powders were consolidated and sintered at 1200 ◦C. Diffusion bonding couples of ...
Production of ni3al-cr composite and investigation of mechanical properties
(Gazi University Journal of Science, 2011)
Nickel aluminide intermetallic compounds possess attractive properties that make them good candidates for
high temperature structural applications. It is known that Ni3Al intermetallics are commonly used in various
application ...
Investigation of mechanical properties of fe-doped intermetallic nial
(El-Cezerî Fen ve Mühendislik Dergisi, 20.06.2017)
Son yıllarda NiAl gibi intermetalik malzemeler, yüksek sıcaklık uygulamalarında iyi mekanik ve fiziksel özellikler göstermektedir. Özellikle yüksek erime noktası, iyi oksidasyon direnci ve yüksek sertlik bu intermetaliklerin ...
Investigation of mechanical properties of boronized composites produced by electroless Ni coating
(Journal of Mineral, Metal and Material Engineering, 23.04.2020)
In this study, ceramic-metal composite production and characterization have been made in order to increase the service life of plotter tools used in soil industry. In the study Ni coated (36% AlN + 3% WC) powders were ...
Sintering and characterization of SiC reinforced Ni powders in microwave furnace
(International journal of engineering research and development, 28.01.2020)
In this study, SiC reinforced nickel matrix composites, microwave at different temperatures It is produced by sintering in oven. Nickel deposition on SiC powders was achieved by using electroless nickel plating technique. ...
Production and characterization of Ti-10Cr-3,33Co-3,33egg shelter composite materials using by powder metallurgy
(International journal of engineering research and development, 28.01.2020)
Titanium based intermetallic compounds are frequently used in the production of biomaterials. The behavior of titanium similar to bone mechanical properties causes the use of titanium as a biomaterial and preferred among ...
Ti-Cr-Co kompozit malzemelerin poisson oranı, sertliği ve elastik modülleri arasındaki korelasyon
(Afyon Kocatepe Üniversitesi, 10.09.2019)
Çalışma, Ti-Cr-Cokompozit malzemelerin ultrasonik özelliklerini araştırmayı amaçlamaktadır. Deneysel olarak üretilen ve literatürden toplanan verilere dayanarak, Ti-Cr-Cokompozit numuneleri için Young modülü, Kayma Modülü ...
How improved to WC based hard materials
(Erzincan University, 31.12.2019)
Tungsten carbide is known to have excellent corrosion resistance and high hardness within carbide ceramics. Due to their superior mechanical properties and wear resistance, tungsten carbide cutting tools containing Co ...