Ara
Toplam kayıt 30, listelenen: 11-20
On the investigation of the energy efficiency using PID and fuzzy logic controllers in a marble machine
(EMaTTech Journals, 2012)
Energy consumption is the main cost item in the cutting machines with diamond segmented circular sawblade. Therefore, there are many benefits of taking measures for reducing the energy consumption. The aim of presented ...
Performing speed control of a DC motor with auto-tuning PIDPerforming speed control of a DC motor with auto-tuning PID
(Afyon Kocatepe Üniversitesi, 2019)
Although advanced controllers are used in control applications, proportional-integral-derivative (PID)
controllers are preferred in industry due to their simple structure and ease of application. However, it
can difficult ...
Preparation and characterization of sol-gel derived 4%La2O 3- Al2O3 ceramic membrane on clay-based supports
(Trans Tech Publications, 01.05.2004)
In this work, γ-Al
2
O
3
membrane layer (4 wt % La
2
O
3
+ 96 % Al
2
O
) was coated on the
clay based porous support by using the sol-gel coating. The coating solution was prepared by using
boehmite (AlOOH), ...
Utilization of marble and boron waste in brick products
(IJCESEN, 01.02.2019)
In this study, usability of marble and boron wastes as alternative raw materials in the production of bricks was investigated. They were used in different ratios to prepare samples. Marble waste in concentrations of 5, ...
Investigation of wear strength of blast furnace slag blended polymer materials
(Polish Academy of Sciences, 01.02.2017)
Having symmetrical and balanced material properties, polymer matrix composites are increasingly becoming
popular due to easiness of construction and are use in the production of aerospace and automotive structures.
In ...
The effect of different mineral additives on non-wettability and surface energy of epoxy floor coating [Farklı mineral katkıların epoksi zemin kaplama malzemesinin ıslanmazlığına ve yüzey enerjisine etkisi]
(Gazi Üniversitesi, 01.02.2018)
Bu çalışmada epoksi esaslı zemin kaplama malzemesinin ıslanmazlık ve yüzey enerjisi üzerine mineral katkı
türü ve miktarının etkisi incelenmiştir. Mineral katkı olarak üç farklı atık ürün (uçucu kül, silis dumanı ve
yüksek ...
Eskişehir-Mihalıçcık kaolenlerinin elektrokinetik özellikleri
(Afyon Kocatepe Üniversitesi, 01.08.2011)
Bu çalışmada, Eskişehir-Mihalıçcık ilçesi Ahırözü ve Üçbaşlı köylerindeki kil yataklarından temin edilen
kaolen numuneleri karakterize edilerek, su içerisinde elektrokinetik özellikleri incelenmiştir. Bu
kapsamda, her ...
Influence of dry grinding on physicochemical and surface properties of talc
(Oficyna Wydawnicza Politechniki Wrocławskiej, 01.02.2017)
In this study the effect of dry grinding on hydrophobicity, surface free energy (SFE), particle size distribution, surface area, porosity, oil absorption, and whiteness of talc was investigated. The dry grinding was performed ...
Saf C S fazının zamana bağlı zeta potansiyel (ZP) değişimi ile hidratasyon davranışı (prizlenme) arasındaki ilişki 3
(Afyon Kocatepe Üniversitesi, 01.12.2014)
Bu çalışmada, gerçek şartlar altında (su/çimento(w/c) oranı: 0.5) normal portland çimentosunun (PÇ) saf
C3S(3CaO.2SiO
) klinker fazının zamana bağlı zeta potansiyel (ZP) ölçümleri yapılmıştır. Elde edilen ZP
eğrileri, ...
Lavvar tesisi tikiner atığından kömürün geri kazanımı
(Dicle Üniversitesi, 01.02.2019)
Yeraltı kaynaklarımızın hızla tükendiği bugünlerde yerli kömür ihtiyacımız da hızla artmaktadır. Bu yüzden yıkama tesislerinde yıkama verimlerini maksimum seviyelere çıkarmak gerekmektedir. Bazı durumlarda ise tesis ...