Ara
Toplam kayıt 22, listelenen: 11-20
Wear and corrosion behaviour of borided and nitrided m2 high speed steel
(Journal of the Balkan Tribological Association, 2013)
Boriding and nitriding lead to improved tribological and corrosive properties of M2 high speed steel. Boronising treatment was carried out in Ekabor-II powders at the process temperature of 950 degrees C for 4 h. Gas ...
Diffusion kinetics of borided AISI 52100 and AISI 440C steels
(Elsevier, 2012)
In this study, the case properties and diffusion kinetics of AISI 440C and AISI 52100 steels borided in Ekabor-II powder were investigated by conducting a series of experiments at temperatures of 1123, 1173 and 1223 K for ...
Investigation of diffusion kinetics of plasma paste borided AISI 8620 steel using a mixture of B2O3 paste and B4C/SiC
(Springer, 2013)
In the present study, AISI 8620 steel was plasma paste borided by using
various B2O3 paste mixture. The plasma paste boriding process was carried out in a
dc plasma system at temperatures of 973, 1023 and 1073 K for 2, ...
The examination of corrosion behaviors of HAP coated Ti implant materials and 316L SS by Sol-Gel method 1
(Pleiades Publishing, Ltd, 2011)
In this research, hydroxyapatite (HAP) coatings have been produced on Ti, Ti6Al4V alloy and 316L stainless steel substrates by sol–gel method. (NH4) H2PO4 is taken as P precursor and Ca(NO3)2 4H2O is taken as Ca precursor ...
The corrosion and wear behavior of TiN and TiAlN coated AISI 316 L stainless steel
(Springer, May 2014)
In this study, TiN and TiAlN coatings were deposited on AISI 316 L stainless steel substrates by PVD techniques. The composition and crystalline structure of the as-deposited coatings were analyzed by energy dispersive ...
Corrosion behavior of boro-tempered ductile iron
(Springer, May 2010)
In this study, the effect of boro-tempering heat treatment on the microstructure and corrosion behavior of unalloyed ductile iron was investigated. The corrosion characteristics of ductile iron have been determined by ...
Investigation of mechanical properties of boro-tempered ductile iron
(Elsevier, 2010)
In this study, the effects of boro-tempering heat treatment on mechanical properties of ductile iron were investigated. Standard tensile test samples and unnotched Charpy specimens were boronized at 900 °C for 1, 3 and 5 ...
Investigation of surface properties and wear resistance of borided steels with different B4C mixtures
(Niscair, 2012)
Boriding is a thermo-chemical surface hardening treatment applied to iron based materials. This treatment is performed by boron element diffusing into iron based materials at high temperatures. Wear resistance increases ...
Analysis with taguchi method of wear behaviors of borided AISI 52100 steels
(Journal of The Balkan Tribological Association, 2013)
In this study, case properties and analysis of wear behaviour of borided AISI 52100 steel with the Taguchi method were investigated by conducting a series of experiments in Ekabor-II powders at process temperatures of 850, ...
Characterization and Rockwell-C adhesion properties of chromium-based borided steels
(Journal of Adhesion Science and Technology, 2015)
In this study, adhesion properties of boride layers formed on the surface of AISI 52100, AISI 5140, AISI 440C, AISI 420 and AISI 304 steels were investigated. Boronizing treatment was carried out in Ekabor-II powders at ...