Ara
Toplam kayıt 32, listelenen: 1-10
Borlanmış AISI 4140 çeliğinin farklı sıcaklık ve yüklerde aşınma davranışlarının incelenmesi
(Pamukkale Üniversitesi 11. Uluslararası Malzeme Sempozyumu, 2006)
Bu çalışmada; 4140 çeliği ticari EKabor-II borlama tozu içerisinde 950 ºC’de 5 saat süreyle borlanmıştır. XRD analizleri bor tabakasının tamamının Fe2B fazından meydana geldiğini göstermiştir. Borür tabakası yaklaşık 80 ...
Ticari EKabor-II tozunun borlama işleminde tekrar kullanma sayısının araştırılması
(2006)
Bu çalışmada, ticari Ekabor II tozunun borlama işleminde tekrar kullanılabilirliği araştırılmıştır. Bu amaçla küresel grafitli dökme demir numuneler, daha önce borlanmış paslanmaz çelik kutu içerisinde Ekabor II tozuna ...
Corrosion behaviors of hydroxyapatite coated by electrodeposition method of Ti6Al4V, Ti and AISI 316L SS substrates
(Pleiades Publishing, Ltd, 2013)
Electrodeposition method was used to obtain hydroxyapatite (HAP) coatings on Ti6Al4V, Ti and AISI 316L SS substrates. Electrodeposition solution is prepared as Ca(NO3)2 ⋅ 4H2O and (NH4)H2PO4. Additionally, three different ...
Investigation of corrosion and wear behavior of borided AISI P20 steel in micro-wave furnace
(IOP Publishing, 2019)
In this study, the effect of microwave boronizing treatment on the corrosion and wear behaviour of boride layer formed on AISI P20 steel have been investigated. The boronizing treatment was carried out using Ekabor-II ...
The effects of boro-tempering heat treatment on microstructural properties of ductile iron
(Elsevier, March 2011)
In this study, the effects of boro-tempering heat treatment on microstructural properties of ductile iron were investigated. Test samples with dimensions of 10 × 10 × 55 mm were boronized at 900 °C for 1, 3 and 5 h and ...
Investigation of diffusion kinetics of borided AISI P20 steel in micro-wave furnace
(Elsevier, 2015)
In present study, kinetics of borides formed on AISI P20 steel has been investigated by boronizing treatment which was carried out in Ekabor-II powders at the process temperatures of 1123, 1173 and 1223 K for 2, 4 and 6 h ...
Investigation of the diffusion kinetics of borided stainless steels
(Springer, December 2)
In this study, the kinetics of borides formed on AISI 420, AISI 304 and AISI 304L stainless steels was investigated. Boronizing treatment was carried out using Ekabor-II powders at the processing temperatures of 1123, 1173 ...
Investigation of electrochemical corrosion behavior in a 3.5wt.% NaCl solution of boronized dual-phase steel
(Elsevier, April 2013)
In this study, corrosion behaviors of boronized and non-boronized dual-phase steel were investigated
with Tafel extrapolation and linear polarization methods in a 3.5 wt.% NaCl solution. Microstructure analyses show that ...
Investigation of wear and adhesion behaviors of borided steels
(Springer, 2016)
In this study, AISI P20, H13 and D2 steels were pack borided at 900 and 950 °C for retention times of 2, 4 and 6 h. The boride layer thickness values changed depending on the chemical composition of the steels. The hardness ...
Corrosion and wear behaviors of boronized AISI 316L stainless steel
(Springer, 2013)
In this study, the effects of a boronizing treatment on the corrosion and wear behaviors of AISI 316L austenitic stainless steel (AISI 316L) were examined. The corrosion behavior of the boronized samples was studied via ...