Ara
Toplam kayıt 25, listelenen: 11-20
Corrosion and wear behaviors of boronized AISI 316L stainless steel
(Springer, 2013)
In this study, the effects of a boronizing treatment on the corrosion and wear behaviors of AISI 316L austenitic stainless steel (AISI 316L) were examined. The corrosion behavior of the boronized samples was studied via ...
Adhesion and wear properties of boro-tempered ductile iron
(Elsevier, 2011)
In this study, adhesion and wear properties of boro-tempered ductile iron (BDI) were investigated. Boro-tempering was carried out on two stage processes i.e. boronizing and tempering. At the first stage, ductile iron samples ...
Regularly I_2-Convergence and I_2-Cauchy double dequences of functions
(Pioneer Scientific Publisher, 2011)
In this paper, author introduces the notions of regularly (I_2, I)-convergence and (I_2, I)-Cauchy double sequence of real valued functions. Also, study some properties of them.
Wear and corrosion behaviour of borided and nitrided m2 high speed steel
(Journal of the Balkan Tribological Association, 2013)
Boriding and nitriding lead to improved tribological and corrosive properties of M2 high speed steel. Boronising treatment was carried out in Ekabor-II powders at the process temperature of 950 degrees C for 4 h. Gas ...
Diffusion kinetics of borided AISI 52100 and AISI 440C steels
(Elsevier, 2012)
In this study, the case properties and diffusion kinetics of AISI 440C and AISI 52100 steels borided in Ekabor-II powder were investigated by conducting a series of experiments at temperatures of 1123, 1173 and 1223 K for ...
Improvement of energy efficiency using a multi-input fuzzy logic controller in a stone cutting machine
(ASTM, 2018)
Block cutter machines (BCMs) are commonly used in the manufacturing of natural stones.
Although the energy consumption of the BCM is affected by the rotation speed of the blade, depth
of cut, and traverse speed, these ...
Corrosion behavior of ultra-high strength drilling steel in alkaline brines containing hydrogen sulfide at high temperature
(Nace International, 2016)
In-situ electrochemical measurements were used to study the sour corrosion of ultra-high strength low alloy carbon steel (UHSLA) in alkaline brines at 200 °C. The solutions were buffered with NaHCO3 / Na2CO3 / NaOH to pH ...
Investigation of mechanical properties of boro-tempered ductile iron
(Elsevier, 2010)
In this study, the effects of boro-tempering heat treatment on mechanical properties of ductile iron were investigated. Standard tensile test samples and unnotched Charpy specimens were boronized at 900 °C for 1, 3 and 5 ...
Analysis with taguchi method of wear behaviors of borided AISI 52100 steels
(Journal of The Balkan Tribological Association, 2013)
In this study, case properties and analysis of wear behaviour of borided AISI 52100 steel with the Taguchi method were investigated by conducting a series of experiments in Ekabor-II powders at process temperatures of 850, ...
Izmir and Özalp (Van) Cases in the Reflection of Maritim and Continentalite to Phenological Periods of Agricultural Plants
(St. Kliment Ohridski University Press, 2016)
Izmir which is chosen as a research area is located in the Aegean Region, in the
western edge of the Aegean part and Ozalp (Van) is located in the northeast of Van
province called Yukarı Murat-Van close to Iran (Fig.1). ...