Ara
Toplam kayıt 20, listelenen: 11-20
Effect of sliding speed on friction and wear behaviour of borided gear steels
(Journal of the Balkan Tribological Association, 2014)
In this study, the wear behaviour of GS18NiMoCr36 (GS18), GS22NiMoCr56 (GS22) and GS32NiCrMo6.4 (GS32) gear steels borided in Ekabor-II powder was investigated by conducting a series of experiments at temperatures ...
Boride layer growth kinetics of the borided high alloyed steels
(Oxidation Communications, 2015)
In this study, the case properties and diffusion kinetics of high alloyed cold work tool steel borided in Ekabor-2 powder were investigated by conducting a series of experi-ments at temperatures of 1123, 1173 and 1223 K ...
Investigation of corrosion behavior of borided gear steels
(Springer, 2014)
In this study, corrosion behaviors of GS18NiMoCr36 (GS 18) and GS32NiCrMo6.4 (GS 32) gear steels borided in Ekabor-II powder at the temperature of 950 °C for 2 and 6 h were investigated in a 6 % M HCI acid solution. The ...
Borlanmış çift fazlı çeliğin mikroyapı ve mekanik özelliklerinin incelenmesi
(Ekim 2010)
Son yıllarda bilim adamları tarafından çeliklerin yüzey özelliklerini iyileştirme ve geliştirme adına çok sayıda
çalışmalar gerçekleştirilmiştir. Bor elementinin çelik yüzeylerinin modifikasyonunda kullanılması, ...
Wear behaviour of plasma paste boronized of AISI 8620 steel with borax and B2O3 paste mixtures
(Elsevier, 2013)
In the present study, AISI 8620 steel was plasma paste boronized (PPB) by using paste mixtures with different borax and B2O3 percentages. The PPB process was carried out in a DC plasma system at 973, 1023 and 1073 K for 5 ...
Investigation of surface properties and wear resistance of borided steels with different B4C mixtures
(Niscair, 2012)
Boriding is a thermo-chemical surface hardening treatment applied to iron based materials. This treatment is performed by boron element diffusing into iron based materials at high temperatures. Wear resistance increases ...
%3,0 Mg içeren borlanmış Co-Mg alaşımının yüzey özelliklerinin incelenmesi
(El-Cezerî Fen ve Mühendislik Dergisi, 2019)
Bu çalışmada, %97 Co ve %3 Mg içeren Co-Mg alaşımına borlama işlemi gerçekleştirilmiştir. Co-Mg
alaşım malzemesini üretmek için toz metalurjisi (TM) yöntemi kullanılmıştır. Bu yöntemde, Co ve Mg metal
tozları kapalı ...
Investigation of wear strength of blast furnace slag blended polymer materials
(Polish Academy of Sciences, 01.02.2017)
Having symmetrical and balanced material properties, polymer matrix composites are increasingly becoming
popular due to easiness of construction and are use in the production of aerospace and automotive structures.
In ...
The effect of different mineral additives on non-wettability and surface energy of epoxy floor coating [Farklı mineral katkıların epoksi zemin kaplama malzemesinin ıslanmazlığına ve yüzey enerjisine etkisi]
(Gazi Üniversitesi, 01.02.2018)
Bu çalışmada epoksi esaslı zemin kaplama malzemesinin ıslanmazlık ve yüzey enerjisi üzerine mineral katkı
türü ve miktarının etkisi incelenmiştir. Mineral katkı olarak üç farklı atık ürün (uçucu kül, silis dumanı ve
yüksek ...
%93 Co içeren borlanmış Co-Mg alaşımının karakterizasyonu
(28.04.2019)
Bu çalışmada, %93 Co ve %7 Mg içeren Co-Mg alaşımının borlama işlemi gerçekleştirilmiştir. Alaşım
malzemesini üretmek için toz metalurjisi yöntemiyle Co ve Mg metal tozları uygun kaplar içerisinde karıştırılarak
özel ...