Ara
Toplam kayıt 273, listelenen: 21-30
Sol-Jel yöntemiyle borlanmış inconel alaşımının yüzey karakterizasyonu
(28.04.2019)
Bu çalışmada, Inconel alaşımı sol-jel mettodu kullanılarak borlanmıştır. Borlama sonrası numuneler elektrik
rezistanslı fırında 900○C'de 1 saat bekeltilerek sinterlemiştir. Numuneler kesitten kesilerek gerekli ...
Ni-al-ti kompozit üretimi ve mekaniksel özelliklerinin incelenmesi
(18.05.2011)
Intermetallic materials such as NiAl are among
advanced technology materials that have outstanding mechanical
and physical properties for high temperature applications.
Especially creep resistance, low density and high ...
Fabrication of ni metal matrix composites reinforced with sio2 by microwave sintering
(15.05.2009)
Nickel matrix reinforced with SiO2 has been manufactured
by microwave sintering at various temperatures. A uniform
nickel layer on SiO2 powders was deposited prior to
sintering using electroless plating technique, ...
Quality characteristics of noodle including ground yellow poppy seed
(International Journal of Secondary Metabolite, 2017)
The objective of this study is the production of noodle including ground yellow poppy seed which has
phenolic compounds. Phenolic compounds have antioxidant activity. According to the researches, these
compounds reduce ...
The effect of storage on some properties of 3 different ground poppy seed fats
(IJSM International Journal of Secondary Metabolite, 2017)
The poppy seed is a traditional product in Afyon. There are there type poppy seed. These are white
poppy seed, yellow poppy seed and gray poppy seed. The objective of this study is to investigate the effect of
storage ...
Otel İşletmelerinde dönüştürücü liderlik davranışlarının örgüt sağlığı üzerine etkileri: Afyonkarahisar ilinde bir araştırma
(Yönetim Bilimleri Dergisi, 2015)
Turizm sektöründe özellikle 1950’li yıllardan sonra rekabetin artması
ve küresel boyuta ulaşması ile bu sektör içerisinde yer alan konaklama
işletmeleri varlıklarını sürdürebilmek için birçok yeni yönetim tekniğini
bünyesinde ...
Ni-al-cr kompozit üretimi ve mekaniksel özelliklerinin araştırılması
(18.05.2011)
Nickel aluminide intermetallic compounds possess attractive properties that make them good candidates for high temperature structural applications. It is known that Ni3Al intermetallics are commonly used in various application ...
Nikel magnezyum alaşımının borlanmasında magnezyum elementinin etkisi
(28.07.2018)
Bu çalışmada, saf % 97 Ni ve % 3 Mg içeren Ni-Mg alaşımı borlanmıştır. TM yöntemiyle önce saf % 97 Ni ve %
3 Mg içeren toz karışımları homojen bir şekilde toz karıştırıcıda 24 saat süreyle karıştırılmıştır. Karıştırılan ...
Borlanmış fe-mg alaşımının karakterizasyonu
(27.10.2017)
Toz me talurjisi (TM), farklı boyutlardaki tozların karıştırılarak pres vasıtasıyla şekillendirilip, uygun atmosfer ortamında
be l li sıcaklık aralığında sinterlenerek üretilen malzeme üretim yöntemidir. Ge rçekleştirilen ...
Production of ni3al-fe composite and investigation of mechanical properties
(05.10.2011)
In intermetallics high resistance to creep and oxidation, high strenght, low density are desired properties. Sintering
process was used in this study by adding different amounts of Fe powder to Ni-Al powder mixture. When ...