Başlık için Metalurji ve Malzeme Mühendisliği Bölümü listeleme
Toplam kayıt 47, listelenen: 27-46
-
Investigation of corrosion and wear behavior of borided AISI P20 steel in micro-wave furnace
(IOP Publishing, 2019)In this study, the effect of microwave boronizing treatment on the corrosion and wear behaviour of boride layer formed on AISI P20 steel have been investigated. The boronizing treatment was carried out using Ekabor-II ... -
Investigation of corrosion behavior of borided gear steels
(Springer, 2014)In this study, corrosion behaviors of GS18NiMoCr36 (GS 18) and GS32NiCrMo6.4 (GS 32) gear steels borided in Ekabor-II powder at the temperature of 950 °C for 2 and 6 h were investigated in a 6 % M HCI acid solution. The ... -
Investigation of corrosion behaviors at different solutions of boronized AISI 316L stainless steel
(Springer, May 2013)In this study, corrosion behaviors of boronized and non-boronized AISI 316L stainless steel (AISI 316L SS) were investigated with Tafel extrapolation and linear polarization methods in different solutions (1 mol dm−3 HCl, ... -
Investigation of Corrosion Behaviours Hydroxyapatite (HAP) coated Ti6Al4V Implants by Using Electrochemical Deposition Method
(2018)In this research, hydroxyapatite (HAP) has been coated on the Ti6A14V alloy surface by electrophoresis method. In this electrophoresis method, NH4H2PO4 is taken as P precursor and Ca (NO3)2.4H2O is taken as Ca precursor ... -
Investigation of diffusion kinetics of borided AISI P20 steel in micro-wave furnace
(Elsevier, 2015)In present study, kinetics of borides formed on AISI P20 steel has been investigated by boronizing treatment which was carried out in Ekabor-II powders at the process temperatures of 1123, 1173 and 1223 K for 2, 4 and 6 h ... -
Investigation of diffusion kinetics of plasma paste borided AISI 8620 steel using a mixture of B2O3 paste and B4C/SiC
(Springer, 2013)In the present study, AISI 8620 steel was plasma paste borided by using various B2O3 paste mixture. The plasma paste boriding process was carried out in a dc plasma system at temperatures of 973, 1023 and 1073 K for 2, ... -
Investigation of electrochemical corrosion behavior in a 3.5wt.% NaCl solution of boronized dual-phase steel
(Elsevier, April 2013)In this study, corrosion behaviors of boronized and non-boronized dual-phase steel were investigated with Tafel extrapolation and linear polarization methods in a 3.5 wt.% NaCl solution. Microstructure analyses show that ... -
Investigation of mechanical properties of boro-tempered ductile iron
(Elsevier, 2010)In this study, the effects of boro-tempering heat treatment on mechanical properties of ductile iron were investigated. Standard tensile test samples and unnotched Charpy specimens were boronized at 900 °C for 1, 3 and 5 ... -
Investigation of surface properties and wear resistance of borided steels with different B4C mixtures
(Niscair, 2012)Boriding is a thermo-chemical surface hardening treatment applied to iron based materials. This treatment is performed by boron element diffusing into iron based materials at high temperatures. Wear resistance increases ... -
Investigation of the diffusion kinetics of borided stainless steels
(Springer, December 2)In this study, the kinetics of borides formed on AISI 420, AISI 304 and AISI 304L stainless steels was investigated. Boronizing treatment was carried out using Ekabor-II powders at the processing temperatures of 1123, 1173 ... -
Investigation of tribological behaviour of plasma paste boronized of AISI 8620, 52100 and 440C steels
(Niscair, 2011)In the present study, AISI 8620, 52100 and 440C steels were plasma paste boronized (PPB) by using 100% borax paste. PPB process was carried out in a dc plasma system at temperature of 700 and 800 °C for 3 and 5 h in a gas ... -
Investigation of wear and adhesion behaviors of borided steels
(Springer, 2016)In this study, AISI P20, H13 and D2 steels were pack borided at 900 and 950 °C for retention times of 2, 4 and 6 h. The boride layer thickness values changed depending on the chemical composition of the steels. The hardness ... -
Kinetics of borided gear steels
(Springer, 2013)In this study, the case properties and diffusion kinetics of GS18NiMoCr36 (GS18), GS22NiMoCr56 (GS22) and GS32NiCrMo6.4 (GS32) gear steels borided in Ekabor-II powder were investigated by conducting a series of experiments ... -
Kinetics of plasma paste boronized AISI 8620 steel in borax paste mixtures
(Springer, 2013)In the present study, AISI 8620 steel was plasma paste boronized by using various borax paste mix tures. The plasma paste boronizing process was carried out in a dc plasma system at a temperature of 973, 1023 and 1073 K ... -
Östemperlenmiş küresel grafitli dökme demirin mikro-aşınma davranışına östemperleme sıcaklığının etkisi
(Mayıs 2009)Bu çalısmada, östemperlenmis küresel grafitli dökme demirin (ÖKGDD) mikro-asınma davranısına östemperleme sıcaklıgının etkisi arastırılmıstır. 900 °C’de 60 dakika östenitlenen numuneler, 250, 300, 350 ve 400 ºC’lerde ... -
Plasma paste boronizing of AISI 8620, 52100 and 440C steels
(Elsevier, 2011)In the present study, AISI 8620, 52100 and 440C steels were plasma paste boronized (PPB) by using 100% borax paste. PPB process was carried out in a dc plasma system at temperature of 700 and 800 °C for 3 and 5 h in a gas ... -
Sol-Jel yöntemiyle borlanmış inconel alaşımının yüzey karakterizasyonu
(28.04.2019)Bu çalışmada, Inconel alaşımı sol-jel mettodu kullanılarak borlanmıştır. Borlama sonrası numuneler elektrik rezistanslı fırında 900○C'de 1 saat bekeltilerek sinterlemiştir. Numuneler kesitten kesilerek gerekli ... -
Surface characterization of pack and plasma paste boronized of 21NiCrMo2 steel [Kutu ve plazma pasta borlanmiş 21NiCrMo2 çeliǧinin yüzey karekterizasyonu]
(Journal of the Faculty of Engineering and Architecture of Gazi University, 2012)In the present study, 21NiCrMo2 steel were plasma paste boronized by using 100 wt.% B2O3, 70 wt.% B2O3 + 30 wt. % SiC, 70 wt.% B2O3 + 30 wt.% B4C, 30 wt. % B2O3 + 70 wt.% SiC, 30 wt.% B2O3 + 70 wt.% B4C pastes. This steel ... -
Ticari EKabor-II tozunun borlama işleminde tekrar kullanma sayısının araştırılması
(2006)Bu çalışmada, ticari Ekabor II tozunun borlama işleminde tekrar kullanılabilirliği araştırılmıştır. Bu amaçla küresel grafitli dökme demir numuneler, daha önce borlanmış paslanmaz çelik kutu içerisinde Ekabor II tozuna ... -
Wear and corrosion behaviour of borided and nitrided m2 high speed steel
(Journal of the Balkan Tribological Association, 2013)Boriding and nitriding lead to improved tribological and corrosive properties of M2 high speed steel. Boronising treatment was carried out in Ekabor-II powders at the process temperature of 950 degrees C for 4 h. Gas ...