Search
Now showing items 1-10 of 28
The effect of polypyrrole and nickel + polypyrrole coatings on corrosion behaviour AISI 304 stainless steel
(Pleiades Publishing, Ltd, 2015)
Polypyrrole (PPy) and nickel + PPy (Ni + PPy) coatings have been occured on AISI 304 stainless steel (304 SS) surface by cyclic voltammetry technique in aqueous oxalic acid solutions and as the supporting electrolytes was ...
Corrosion of 13Cr steel at the Cement/Casing interface in CO2/H2S environments at 4, 85 and 200 °C
(Nace International, 2018)
A study was carried out to investigate corrosion at the cement/casing interface for 13Cr casing steel. Cement simulated pore solution (CSPS) was developed by exposing cement pieces to 5% NaCl at 100 °C and 10 MPa in ...
Corrosion behavior of boro-tempered ductile iron
(Springer Link, May 2010)
In this study, the effect of boro-tempering heat treatment on the microstructure and corrosion behavior of unalloyed ductile iron was investigated. The corrosion characteristics of ductile iron have been determined by ...
The effect of alcohol on the passivation of Al alloys in 1 N H 2 SO 4 solution
(Pleiades Publishing, Ltd, 2010)
In this study, the influence of different alcohol on the passivation of aluminium alloys have been investigated by using current potential curves. Experimental results show that the addition of alcohol in H2SO4 solution ...
Corrosion inhibition of st37 steel in geothermal fluid by quercus robur and pomegranate peels extracts
(Pleiades Publishing, Ltd, 2015)
Plant extracts have become important as an environmentally acceptable, readily available and renewable source of wide range of inhibitors. Tannins, a class of natural, non toxic and biodegradable polyphenolic compounds, ...
Electrochemical determination of bisphenol a with pencil graphite electrodes modified with Co(II), Ni(II), Cu(II) and Fe(II) phthalocyaninetetrasulfonates
(The Japan Society for Analytical Chemistry, 2016)
Pencil graphite electrodes modified with Co(II), Ni(II), Cu(II) and Fe(II) metallophthalocyaninetetrasulfonates (MePcTSs) were investigated for electrochemical determination of bisphenol A (BPA). Electrochemical performances ...
Corrosion behavior of ultra-high strength drilling steel in alkaline brines containing hydrogen sulfide at high temperature
(Nace International, 2016)
In-situ electrochemical measurements were used to study the sour corrosion of ultra-high strength low alloy carbon steel (UHSLA) in alkaline brines at 200 °C. The solutions were buffered with NaHCO3 / Na2CO3 / NaOH to pH ...
Tertiary amine methacrylate based polymers as corrosion ınhibitors in hcl solution. Part II
(Pleiades Publishing, Ltd, 2019)
In this study, the inhibitive performance of novel synthesised water-soluble of different molecular weight diblock copolymers of derivative methyl methacrylate (VB84, VB206, VB207, VB361, VB371,VB406) on the corrosion ...
Investigation of corrosion behaviors at different solutions of boronized AISI 316L stainless steel
(Springer Link, May 2013)
In this study, corrosion behaviors of boronized and non-boronized AISI 316L stainless steel (AISI 316L SS) were investigated with Tafel extrapolation and linear polarization methods in different solutions (1 mol dm−3 HCl, ...
Investigation of corrosion and wear behavior of borided AISI P20 steel in micro-wave furnace
(IOP Publishing, 2019)
In this study, the effect of microwave boronizing treatment on the corrosion and wear behaviour of boride layer formed on AISI P20 steel have been investigated. The boronizing treatment was carried out using Ekabor-II ...
