Search
Now showing items 1-10 of 18
Rate of growth of boride layers on stainless steels
(Oxidation Communications, 19.03.2015)
In this study, the case properties and diffusion kinetics of AISI 310 and AISI 430 steels
borided in Ekabor-II powder were investigated by conducting a series of experiments
at temperatures of 1123, 1223 and 1323 K for ...
Investigation of adhesion and tribological behavior of borided aısı 310 stainless steel
(Revista Materia, 14.08.2015)
In the present study, the effects of the boriding process on adhesion and tribological properties of AISI 310
steel were investigated. Boriding was performed in a solid medium consisting of Ekabor-II powders at 1123
and ...
The effect of different mineral additives on non-wettability and surface energy of epoxy floor coating [Farklı mineral katkıların epoksi zemin kaplama malzemesinin ıslanmazlığına ve yüzey enerjisine etkisi]
(Gazi Üniversitesi, 01.02.2018)
Bu çalışmada epoksi esaslı zemin kaplama malzemesinin ıslanmazlık ve yüzey enerjisi üzerine mineral katkı
türü ve miktarının etkisi incelenmiştir. Mineral katkı olarak üç farklı atık ürün (uçucu kül, silis dumanı ve
yüksek ...
Investigation of corrosion behaviors at different solutions of boronized AISI 316L stainless steel
(Springer Link, May 2013)
In this study, corrosion behaviors of boronized and non-boronized AISI 316L stainless steel (AISI 316L SS) were investigated with Tafel extrapolation and linear polarization methods in different solutions (1 mol dm−3 HCl, ...
Surface characterization of pack and plasma paste boronized of 21NiCrMo2 steel [Kutu ve plazma pasta borlanmiş 21NiCrMo2 çeliǧinin yüzey karekterizasyonu]
(Journal of the Faculty of Engineering and Architecture of Gazi University, 2012)
In the present study, 21NiCrMo2 steel were plasma paste boronized by using 100 wt.% B2O3, 70 wt.% B2O3 +
30 wt. % SiC, 70 wt.% B2O3 + 30 wt.% B4C, 30 wt. % B2O3 + 70 wt.% SiC, 30 wt.% B2O3 + 70 wt.% B4C
pastes. This steel ...
Investigation of surface properties and wear resistance of borided steels with different B4C mixtures
(Niscair, 2012)
Boriding is a thermo-chemical surface hardening treatment applied to iron based materials. This treatment is performed by boron element diffusing into iron based materials at high temperatures. Wear resistance increases ...
Effect of sliding speed on friction and wear behaviour of borided gear steels
(Journal of the Balkan Tribological Association, 2014)
In this study, the wear behaviour of GS18NiMoCr36 (GS18), GS22NiMoCr56 (GS22) and GS32NiCrMo6.4 (GS32) gear steels borided in Ekabor-II powder was investigated by conducting a series of experiments at temperatures ...
Plasma paste boronizing of AISI 8620, 52100 and 440C steels
(Elsevier, 2011)
In the present study, AISI 8620, 52100 and 440C steels were plasma paste boronized (PPB) by using 100% borax paste. PPB process was carried out in a dc plasma system at temperature of 700 and 800 °C for 3 and 5 h in a gas ...
Kinetics of plasma paste boronized AISI 8620 steel in borax paste mixtures
(Springer, 2013)
In the present study, AISI 8620 steel was plasma paste boronized by using various borax paste mix
tures. The plasma paste boronizing process was carried out in a dc plasma system at a temperature of 973, 1023 and 1073 K ...
Investigation of corrosion behavior of borided gear steels
(Springer, 2014)
In this study, corrosion behaviors of GS18NiMoCr36 (GS 18) and GS32NiCrMo6.4 (GS 32) gear steels borided in Ekabor-II powder at the temperature of 950 °C for 2 and 6 h were investigated in a 6 % M HCI acid solution. The ...
