Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorErol, Ayhan
dc.contributor.authorYıldız, İsmail
dc.contributor.authorYönetken, Ahmet
dc.date.accessioned2019-12-11T12:11:34Z
dc.date.available2019-12-11T12:11:34Z
dc.date.issued05.10.2011en_US
dc.identifier.urihttps://www.researchgate.net/publication/299212593_Production_of_Ni3Al-Fe_Composite_and_Investigation_of_Mechanical_Properties
dc.identifier.urihttps://hdl.handle.net/11630/7414
dc.description.abstractIn intermetallics high resistance to creep and oxidation, high strenght, low density are desired properties. Sintering process was used in this study by adding different amounts of Fe powder to Ni-Al powder mixture. When the properties of the sample after sintering were examined 40% weight Fe added composition was found as the most suitable ratio in terms of mechanical properties. Analyses were conducted metallographically on the samples after sintering, the densities were calculated, hardness and shear strengths were determined. According to the data 40% Fe added composition had 5,82 gr/cm3 of density, 92,8 HB hardness values and displayed 221 MPa shear strength.en_US
dc.language.isoengen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectSinteringen_US
dc.subjectIntermetallicen_US
dc.subjectPowderen_US
dc.subjectCompositionen_US
dc.titleProduction of ni3al-fe composite and investigation of mechanical propertiesen_US
dc.typeconferenceObjecten_US
dc.relation.journal6. uluslararası toz metalurjisi konferansı ve sergisien_US
dc.departmentTeknoloji Fakültesien_US
dc.identifier.startpage734en_US
dc.identifier.endpage739en_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.contributor.institutionauthorYıldız, İsmail
dc.contributor.institutionauthorYönetken, Ahmet
dc.contributor.institutionauthorErol, Ayhan


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster