Ara
Toplam kayıt 11, listelenen: 1-10
Effect of hydrocarbon chain length on adsorption of cationic surfactants onto clinoptilolite
(Elsevier, 01.01.2003)
The adsorption behavior of quaternary ammonium cationic surfactants with different
hydrocarbon chain lengths, i.e. HDTMA (hexadecyltrimethylammonium), TDTMA (tetradecyltrimethy-
lammonium) and DDTMA (dodecyltrimethylammonium), ...
1/1000 ölçekli kadastro pafta dönüşümünde yapay sinir ağları (YSA) tekniğinin kullanabilirliğinin araştırılması
(2018)
Tapu ve Kadastro Genel Müdürlüğü tarafından Büyük Ölçekli Harita ve Harita Yapım Yönetmeliği (BÖHHBÜY) ne göre 1/1000 ölçekli kadastral paftalar üretilmektedir. Kadastral çalışmalarda altlık oluşturan 1/1000 ölçekli ...
Effect of mineral admixture type on rheological properties of polymeric self-consolidating mortar [Kendiliǧinden yerleşen polimerik harçlarda mineral katkinin reolojik özeliklere etkisi]
(Gazi Üniversitesi, 24.02.2017)
Polimer matrisli kompozitler, simetrik ve dengeli malzeme özelliklerine sahip olmaları, üretim ve kullanım kolaylıklarından dolayı inşaat, hava-uzay yapıları ve otomobil yapıları için popülerlik kazanmaktadır.
Günümüzde ...
Production of Co-Cr-Ti composite and investigation of mechanical properties
(2014)
Intermetallic materials such as Co2Ti, Cr2Ti are
among advanced technology materials that have outstanding
mechanical and physical properties for high temperature
applications. Especially creep resistance, low density
and ...
Cam partikül takviyeli alüminyum matrisli kompozitlerin mikrodalga sinterleme yöntemi ile üretimi
(Afyon Kocatepe Üniversitesi, 13.07.2019)
Bu çalışmada, %0-20 atık cam tozları içeren aluminyum kompozit numuneler üretilmiştir. Farklı oranlarda cam tozu takviyesi içeren karışımlar yüksek devirli bilyeli öğütme işlemine maruz bırakıldıktan sonra tek eksenli ...
On the design of an intelligent battery charge controller for PV panels
(EMaTTech Journals, 2012)
The electricity generations of photo voltaic (PV) panels are strongly related with insolation and temperature. The insolation and temperature are not stable, since the electricity generations of the PV panels are not stable. ...
On the investigation of the energy efficiency using PID and fuzzy logic controllers in a marble machine
(EMaTTech Journals, 2012)
Energy consumption is the main cost item in the cutting machines with diamond segmented circular sawblade. Therefore, there are many benefits of taking measures for reducing the energy consumption. The aim of presented ...
Preparation and characterization of sol-gel derived 4%La2O 3- Al2O3 ceramic membrane on clay-based supports
(Trans Tech Publications, 01.05.2004)
In this work, γ-Al
2
O
3
membrane layer (4 wt % La
2
O
3
+ 96 % Al
2
O
) was coated on the
clay based porous support by using the sol-gel coating. The coating solution was prepared by using
boehmite (AlOOH), ...
Investigation of wear strength of blast furnace slag blended polymer materials
(Polish Academy of Sciences, 01.02.2017)
Having symmetrical and balanced material properties, polymer matrix composites are increasingly becoming
popular due to easiness of construction and are use in the production of aerospace and automotive structures.
In ...
The effect of different mineral additives on non-wettability and surface energy of epoxy floor coating [Farklı mineral katkıların epoksi zemin kaplama malzemesinin ıslanmazlığına ve yüzey enerjisine etkisi]
(Gazi Üniversitesi, 01.02.2018)
Bu çalışmada epoksi esaslı zemin kaplama malzemesinin ıslanmazlık ve yüzey enerjisi üzerine mineral katkı
türü ve miktarının etkisi incelenmiştir. Mineral katkı olarak üç farklı atık ürün (uçucu kül, silis dumanı ve
yüksek ...