Güncel Gönderiler: Araştırma Çıktıları | TR-Dizin | WoS | Scopus | PubMed
Toplam kayıt 387, listelenen: 161-180
-
Effects of H2S and CO2 on Cement/Casing interface corrosion integrity for cold climate oil and gas well applications
(The Electrochemical Society, 2016)Low-temperature corrosion relevant to oil and gas wells was investigated. Casing cement was exposed to brine in contact with CO2 at 4 °C and 10 MPa. Pore water was extracted from wet cement using a die press, and a cement ... -
Corrosion inhibition of st37 steel in geothermal fluid by quercus robur and pomegranate peels extracts
(Pleiades Publishing, Ltd, 2015)Plant extracts have become important as an environmentally acceptable, readily available and renewable source of wide range of inhibitors. Tannins, a class of natural, non toxic and biodegradable polyphenolic compounds, ... -
The effect of polypyrrole and nickel + polypyrrole coatings on corrosion behaviour AISI 304 stainless steel
(Pleiades Publishing, Ltd, 2015)Polypyrrole (PPy) and nickel + PPy (Ni + PPy) coatings have been occured on AISI 304 stainless steel (304 SS) surface by cyclic voltammetry technique in aqueous oxalic acid solutions and as the supporting electrolytes was ... -
Investigation of the diffusion kinetics of borided stainless steels
(Springer, December 2)In this study, the kinetics of borides formed on AISI 420, AISI 304 and AISI 304L stainless steels was investigated. Boronizing treatment was carried out using Ekabor-II powders at the processing temperatures of 1123, 1173 ... -
Corrosion and wear behaviors of boronized AISI 316L stainless steel
(Springer, 2013)In this study, the effects of a boronizing treatment on the corrosion and wear behaviors of AISI 316L austenitic stainless steel (AISI 316L) were examined. The corrosion behavior of the boronized samples was studied via ... -
The effects of boro-tempering heat treatment on microstructural properties of ductile iron
(Elsevier, March 2011)In this study, the effects of boro-tempering heat treatment on microstructural properties of ductile iron were investigated. Test samples with dimensions of 10 × 10 × 55 mm were boronized at 900 °C for 1, 3 and 5 h and ... -
Investigation of corrosion behaviors at different solutions of boronized AISI 316L stainless steel
(Springer, May 2013)In this study, corrosion behaviors of boronized and non-boronized AISI 316L stainless steel (AISI 316L SS) were investigated with Tafel extrapolation and linear polarization methods in different solutions (1 mol dm−3 HCl, ... -
Investigation of diffusion kinetics of borided AISI P20 steel in micro-wave furnace
(Elsevier, 2015)In present study, kinetics of borides formed on AISI P20 steel has been investigated by boronizing treatment which was carried out in Ekabor-II powders at the process temperatures of 1123, 1173 and 1223 K for 2, 4 and 6 h ... -
The corrosion and wear behavior of TiN and TiAlN coated AISI 316 L stainless steel
(Springer, May 2014)In this study, TiN and TiAlN coatings were deposited on AISI 316 L stainless steel substrates by PVD techniques. The composition and crystalline structure of the as-deposited coatings were analyzed by energy dispersive ... -
Electrochemical polymerization of aniline on aluminum electrode from an oxalic acid and H2SO4 solutions
(Pleiades Publishing, Ltd, 2009)In this study, the polymerization of aniline on Al and Pt electrode was examined by cyclic voltammetry There had been reversible reaction on AI electrode. But on the other hand there had been irreversible reaction on Pt ... -
The examination of corrosion behaviors of HAP coated Ti implant materials and 316L SS by Sol-Gel method 1
(Pleiades Publishing, Ltd, 2011)In this research, hydroxyapatite (HAP) coatings have been produced on Ti, Ti6Al4V alloy and 316L stainless steel substrates by sol–gel method. (NH4) H2PO4 is taken as P precursor and Ca(NO3)2 4H2O is taken as Ca precursor ... -
The effect of 3-Methyl 1-Pentyn 3-ol on the corrosion of Al-Si-Cu alloys in acid solutions by using SEM, EDX and AAS
(Pleiades Publishing, Ltd, 2009)In this study, the effect of alloying elements on the corrosion of Al-Si-Cu alloys in H 2 SO 4 and HCl media content 3-methyl–1pentyn–3-ol (3mlp3ol) is investigated by using SEM, EDX, AAS. The effect of active elements and ... -
Formation of deposit and corrosion in Afyonkarahisar geothermal heating system [Afyonkarahisar jeotermal isitma sisteminde oluşan kabuklaşma ve korozyon]
(TMMOB jeoloji müdendisleri odası, 2008)The formation of deposit and corrosion, which was formed depending on the chemical composition of the geothermal water, is one of the most serious problems at the geothermal systems. In this study, ion chromotography (IC) ... -
Tertiary amine methacrylate based polymers as Corrosion Inhibitors in double distilled water. Part I
(Pleiades Publishing, Ltd, 2019)In the current study, the inhibitive performances of tertiary amine methacrlate based water soluble diblock copolymers on the corrosion behaviour of AISI 304 stainless steel were investigated in double distilled water (DDW, ... -
Corrosion behavior of boro-tempered ductile iron
(Springer, May 2010)In this study, the effect of boro-tempering heat treatment on the microstructure and corrosion behavior of unalloyed ductile iron was investigated. The corrosion characteristics of ductile iron have been determined by ... -
Investigation of electrochemical corrosion behavior in a 3.5wt.% NaCl solution of boronized dual-phase steel
(Elsevier, April 2013)In this study, corrosion behaviors of boronized and non-boronized dual-phase steel were investigated with Tafel extrapolation and linear polarization methods in a 3.5 wt.% NaCl solution. Microstructure analyses show that ... -
I-lacunary statistical convergence of sequences of sets
(Faculty of Sciences and Mathematics, University of Nis, 2014)In this paper we study the concepts of Wijsman I-statistical convergence, Wijsman I-lacunary statistical convergence and Wijsman strongly I-lacunary convergence of sequences of sets and investigate the relationship between them -
Production of Co-Cr-Ti composite and investigation of mechanical properties
(2014)Intermetallic materials such as Co2Ti, Cr2Ti are among advanced technology materials that have outstanding mechanical and physical properties for high temperature applications. Especially creep resistance, low density and ... -
Investigation of adhesion and tribological behavior of borided aısı 310 stainless steel
(Revista Materia, 14.08.2015)In the present study, the effects of the boriding process on adhesion and tribological properties of AISI 310 steel were investigated. Boriding was performed in a solid medium consisting of Ekabor-II powders at 1123 and ... -
Rate of growth of boride layers on stainless steels
(Oxidation Communications, 19.03.2015)In this study, the case properties and diffusion kinetics of AISI 310 and AISI 430 steels borided in Ekabor-II powder were investigated by conducting a series of experiments at temperatures of 1123, 1223 and 1323 K for ...
