Ara
Toplam kayıt 75, listelenen: 61-70
Investigation of surface properties and wear resistance of borided steels with different B4C mixtures
(Niscair, 2012)
Boriding is a thermo-chemical surface hardening treatment applied to iron based materials. This treatment is performed by boron element diffusing into iron based materials at high temperatures. Wear resistance increases ...
It was found that…: Introductory it patterns by native and non-native authors
(Eurasian Journal of Applied Linguistics, 2019)
Introductory it pattern, as in it was found that, is of significance in academic writing but the use of
introductory it might be challenging especially for native- and non-native students and non-native
academic writers. ...
Investigation of adhesion and tribological behavior of borided aısı 310 stainless steel
(Revista Materia, 14.08.2015)
In the present study, the effects of the boriding process on adhesion and tribological properties of AISI 310
steel were investigated. Boriding was performed in a solid medium consisting of Ekabor-II powders at 1123
and ...
Rate of growth of boride layers on stainless steels
(Oxidation Communications, 19.03.2015)
In this study, the case properties and diffusion kinetics of AISI 310 and AISI 430 steels
borided in Ekabor-II powder were investigated by conducting a series of experiments
at temperatures of 1123, 1223 and 1323 K for ...
Preparation and characterization of sol-gel derived 4%La2O 3- Al2O3 ceramic membrane on clay-based supports
(Trans Tech Publications, 01.05.2004)
In this work, γ-Al
2
O
3
membrane layer (4 wt % La
2
O
3
+ 96 % Al
2
O
) was coated on the
clay based porous support by using the sol-gel coating. The coating solution was prepared by using
boehmite (AlOOH), ...
Investigation of wear strength of blast furnace slag blended polymer materials
(Polish Academy of Sciences, 01.02.2017)
Having symmetrical and balanced material properties, polymer matrix composites are increasingly becoming
popular due to easiness of construction and are use in the production of aerospace and automotive structures.
In ...
The effect of different mineral additives on non-wettability and surface energy of epoxy floor coating [Farklı mineral katkıların epoksi zemin kaplama malzemesinin ıslanmazlığına ve yüzey enerjisine etkisi]
(Gazi Üniversitesi, 01.02.2018)
Bu çalışmada epoksi esaslı zemin kaplama malzemesinin ıslanmazlık ve yüzey enerjisi üzerine mineral katkı
türü ve miktarının etkisi incelenmiştir. Mineral katkı olarak üç farklı atık ürün (uçucu kül, silis dumanı ve
yüksek ...
Mineralogical and physicochemical properties of talc from Emirdaǧ, Afyonkarahisar, Turkey
(Turkish Journal of Earth Sciences, 13.06.2013)
Lens-shaped talc deposits related to Mesozoic gabbroic rocks are exposed in an area of 2 km
, about 80 km northwest of
Afyonkarahisar (western Anatolia). Different alteration zones in talc deposits were determined depending ...
Influence of dry grinding on physicochemical and surface properties of talc
(Oficyna Wydawnicza Politechniki Wrocławskiej, 01.02.2017)
In this study the effect of dry grinding on hydrophobicity, surface free energy (SFE), particle size distribution, surface area, porosity, oil absorption, and whiteness of talc was investigated. The dry grinding was performed ...
Damping properties of open pore aluminum foams produced by vacuum casting and NaCl dissolution process
(Metellurgija, Nisan 2013)
In this study,damping ratios of 3 samples made of aluminum foam material, which have diff erent-density pores, were
calculated, the eff ects pore density on damping were examined. Experimental modal analysis method was ...