• Newspapers published by the employees against their employers in Turkey: Haber and Basin 

  Gazel, Ahmet Ali (Osmanlı Medeniyeti Araştırmaları Dergisi, 19.12.2023)

  Takvim-i Vekayi started to be published in 1831 and was the first Turkish newspaper published in the Ottoman Empire period. The number of newspapers published in the Ottoman Empire started to increase after 1860. As a ...

• Classifying scuba diving sites through diver reviews with a web scraping based utadis application 

  Yıldırım, Yunus; Ulucan, Aydın; Atıcı, Kazım Barış (Croatian Operational Research Society, 19.12.2021)

  This research addresses the utilization of user-defined and web-based data for decisionmaking in recreational activities, focusing on the case of scuba diving, a globally significant recreational pursuit. While a wealth ...

• Environmentally friendly silver nanoparticles synthesized from Verbascum nudatum var. extract and evaluation of its versatile biological properties and dye degradation activity 

  Hazman, Ömer; Khamidov, Gofur; Yılmaz, Mustafa Abdullah; Bozkurt, Mehmet Fatih; Kargıoğlu, Mustafa; Tukhtaev, Davlat; Erol, İbrahim (Springer Nature, 18.04.2024)

  In the present study, green synthesis of silver nanoparticles (VNE-AgNPs) via Verbascum nudatum extract was carried out for the frst time. The synthesized AgNPs were characterized by diferent spectral methods such as UV–vis, ...

• XIX. yüzyılın ikinci yarısında Kıbrıs’ta diplomat arkeologların eski eser araştırmaları 

  Şahin, Gürsoy (İstanbul Üniversitesi Yayınevi, 20.07.2022)

  Çalışmada kadim bir geçmişe sahip olan Kıbrıs’ta XIX. yüzyılın ikinci yarısında görev yapan Amerikalı ve Avrupalı diplomatların eski eser araştırmaları irdelendi. 1850’ler ve 1870’ler arasında Kıbrıs arkeolojisinde etkin ...

• The totally symmetric Raman stretching vibration v(Mo-Mo) of quadruple molybdenum–molybdenum bonds varies linearly with the mass of molybdenum and its ligands 

  Ceylan, Veli (Springer, 01.09.2013)

  The electronic (400±800 nm), i.r. and Raman (20± 400 cm)1 ) spectra of several hexahalo-di(aquo)dimolybdate(II) anions, Mo2X6 H2O 2ÿ 2 (X = Cl, Cl/Br, Br and I) containing quadruple metal±metal bonds have been investigated. ...

• Klasik Türk edebiyatında izleri görülen marjinal bir edip: Ebû Nüvâs 

  Uz, Emin (Bilimname, 30.04.2022)

  Klasik Arap edebiyatının hemen her alanında yetkinlik kazanmış edip Ebû Nüvâs (öl. 198/813 [?]), edebiyatta yenilikçi hareketin önemli temsilcilerindendir. Özellikle mücûn (müstehcen), hamriyyât (şarap) ve mizaha yönelik ...

• Regional development agencies in Turkey on the scope of governance and local elites: An evaluation after 10-years-experience 

  Göçoğlu, Volkan; Sadıoğlu, Uğur; Dede, Kadir (2020)

  Under the influence of globalization and the European Union membership accession process, important administrative reform initiatives have been taken in Turkey in the 2000s in the framework of economic, social, political, ...

• The effects of employee empowerment on employee job satisfaction: A study on hotels in Turkey 

  Pelit, Elbeyi; Öztürk, Yüksel; Arslantürk, Yalçın (2011)

  Purpose – The main objective of this study is to determine the impact of employee empowerment on job satisfaction. To serve this purpose, empowerment is taken into consideration as two dimensions – i.e. behavioral and ...

• Damping properties of open pore aluminum foams produced by vacuum casting and NaCl dissolution process 

  Dahil,Lütfiye; Karabulut, Abdurrahman; Başpınar, Mustafa Serhat (Metellurgija, Nisan 2013)

  In this study,damping ratios of 3 samples made of aluminum foam material, which have diff erent-density pores, were calculated, the eff ects pore density on damping were examined. Experimental modal analysis method was ...

• An investigation on renewable energy education at the university level in Turkey 

  Karabulut, Abdurrahman; Gedik,Engin; Keçebaş,Ali; Alkan, Mehmet Ali (2011)

  In the present study, to discover how teaching of renewable energy sources in Turkey is carried out at the university level, a questionnaire was developed and applied at different universities in Turkey. The analyses ...

• Determination of diametral error using finite elements and experimental method 

  Karabulut, Abdurrahman (Nisan 2010)

  This study concerns experimental and numerical analysis on a one-sided bound workpiece on the lathe machine. Cutting force creates deflection on workpiece while turning process is on. Deflection quantity is estimated ...

• Diffusion bonding of AZ91 using a silver interlayer 

  Karabulut, Abdurrahman; Baksan, Bedri; Torun, Osman; Çelikyürek, İbrahim (Nisan 2008)

  Diffusion bonding of AZ91 alloy with a silver interlayer was carried out at 480C for different times under 1 MPa in a vacuum of 2x10^-3Pa. Shear test was applied to measure the shear strengths of the joints in the room ...

• Determination of actual dissolution rates from some rock properties in construction of deep salt cavern for natural gas storage 

  Bayram, Fatih; Bektaşoğlu, İlker (Elsevier, 2020)

  Available energy resources should be efficiently used to meet the global energy demand. The storage of energy resources, especially as natural gas, is important to balance extreme fluctuations in demand and supply of energy. ...

• Production of Ni-Cr-Ti-natural fibres composite and investigation of mechanical properties 

  Peşmen, Günnur; Erol, Ayhan; Yönetken, Ahmet (2015 AIP Publishing LLC, 13.04.2015)

  Intermetallic materials such as Ni2Ti, Cr2Ti are among advanced technology materials that have outstanding mechanical and physical properties for high temperature applications. Especially creep resistance, low density and ...

• Experimental and statistical evaluation of cutting methods in relation to specific energy and rock properties 

  Engin, İrfan Celal; Bayram, Fatih; Yaşıtlı, Nazmi Erhan (Springer, 2013)

  In a processing plant, natural stone can be cut by methods such as circular sawing (CS), frame sawing (FS), water jet cutting (WJC) and abrasive water jet cutting (AWJC). The efficiency of cutting systems can be compared ...

• Development of a relational database for learning management systems 

  Deperlioğlu, Ömer; Yılmaz Sarpkaya; Ertuğrul Ergün (TOJET: The Turkish Online Journal of Educational Technology, Ekim 2011)

  In today’s world, Web-Based Distance Education Systems have a great importance. Web-based Distance Education Systems are usually known as Learning Management Systems (LMS). In this article, a database design, which was ...

• Data mining techniques for the prediction of Bohme surface abrasion rates from rock properties 

  Bayram, Fatih (ASTM International, Ocak 2020)

  Abrasion refers to the wearing down of rock surfaces due to abrasive grains. Abrasion resistance refers to the ability of rocks to withstand wear. Abrasion resistance is used to determine the resistance of building ...

• Investigation of mechanical properties of boro-tempered ductile iron 

  Kayalı, Yusuf; Taktak, Şükrü; Ulu, Sinan; Yalçın, Yılmaz (Elsevier, 2010)

  In this study, the effects of boro-tempering heat treatment on mechanical properties of ductile iron were investigated. Standard tensile test samples and unnotched Charpy specimens were boronized at 900 °C for 1, 3 and 5 ...

• Adhesion and wear properties of boro-tempered ductile iron 

  Kayalı, Yusuf; Yalçın, Yılmaz; Taktak, Şükrü (Elsevier, 2011)

  In this study, adhesion and wear properties of boro-tempered ductile iron (BDI) were investigated. Boro-tempering was carried out on two stage processes i.e. boronizing and tempering. At the first stage, ductile iron samples ...

• Diffusion kinetics of borided AISI 52100 and AISI 440C steels 

  Kayalı, Yusuf; Güneş, İbrahim; Ulu, Sinan (Elsevier, 2012)

  In this study, the case properties and diffusion kinetics of AISI 440C and AISI 52100 steels borided in Ekabor-II powder were investigated by conducting a series of experiments at temperatures of 1123, 1173 and 1223 K for ...

View more