Characterization and Rockwell-C adhesion properties of chromium-based borided steels

Yükleniyor...
Küçük Resim

Tarih

Dergi Başlığı

Dergi ISSN

Cilt Başlığı

Yayıncı

Journal of Adhesion Science and Technology

Erişim Hakkı

info:eu-repo/semantics/closedAccess

Özet

In this study, adhesion properties of boride layers formed on the surface of AISI 52100, AISI 5140, AISI 440C, AISI 420 and AISI 304 steels were investigated. Boronizing treatment was carried out in Ekabor-II powders at the temperatures of 850 and 950 °C for 4 h. The properties of boride layers were evaluated by optical microscopy, SEM, X-ray diffraction and micro-Vickers hardness tester. The Daimler-Benz Rockwell-C adhesion test was used to assess the adhesion of boride layers. Test result showed that adhesion of boride layers depended on the dual-phase structure. The stresses at the FeB/Fe2B interphase caused delamination failure and poor interphase adhesion with increase in the depth of hard and brittle FeB-based layer.

Açıklama

Anahtar Kelimeler

Cr-Based Steels, Pack Boriding, Rockwell-C Adhesion Test, FeB Layer, Delamination Failure

Kaynak

Journal of Adhesion Science and Technology

WoS Q Değeri

Scopus Q Değeri

Cilt

29

Sayı

19

Künye

KAYALI, Y., & Taktak, Ş. (2015). Characterization and Rockwell C adhesion properties of chromium based borided steels. Journal of Adhesion Science and Technology, 29(19), 2065–2075.

Onay

İnceleme

Ekleyen

Referans Veren