Ara
Toplam kayıt 83, listelenen: 71-80
Sintering and characterization of SiC reinforced Ni powders in microwave furnace
(International journal of engineering research and development, 28.01.2020)
In this study, SiC reinforced nickel matrix composites, microwave at different temperatures It is produced by sintering in oven. Nickel deposition on SiC powders was achieved by using electroless nickel plating technique. ...
Production and characterization of Ti-10Cr-3,33Co-3,33egg shelter composite materials using by powder metallurgy
(International journal of engineering research and development, 28.01.2020)
Titanium based intermetallic compounds are frequently used in the production of biomaterials. The behavior of titanium similar to bone mechanical properties causes the use of titanium as a biomaterial and preferred among ...
The effect of BaCO3 addition on the sintering behavior of lignite coal fly ash
(Elsevier, 11.04.2008)
The effect of BaCO
3
(witherite) addition on the sintering behavior of lignite coal fly ash taken from the
Seyitömer power plant of Kütahya/Turkey was examined at temperatures of 1100, 1150 and 1200 C
in air atmosphere. ...
Yeterince farkında olamadığımız atıl kaynağımız: Doğaltaş ocak ve fabrika atıkları
(Apa Yayıncılık Ltd. Şti., 01.03.2015)
Hem ülkemizde hem de dünyada yapı ve inşaat sektöründe, dekorasyon ve kaplama malzemesi olarak doğaltaş kullanımı gittikçe yaygınlaşmaktadır. Buna paralel olarak da ülkemizdeki doğaltaş üretimi ve bu üretim sırasında ortaya ...
Ti-Cr-Co kompozit malzemelerin poisson oranı, sertliği ve elastik modülleri arasındaki korelasyon
(Afyon Kocatepe Üniversitesi, 10.09.2019)
Çalışma, Ti-Cr-Cokompozit malzemelerin ultrasonik özelliklerini araştırmayı amaçlamaktadır. Deneysel olarak üretilen ve literatürden toplanan verilere dayanarak, Ti-Cr-Cokompozit numuneleri için Young modülü, Kayma Modülü ...
How improved to WC based hard materials
(Erzincan University, 31.12.2019)
Tungsten carbide is known to have excellent corrosion resistance and high hardness within carbide ceramics. Due to their superior mechanical properties and wear resistance, tungsten carbide cutting tools containing Co ...
Cu-SiC kompozitlerin mekanik özelliklerinin ultrasonik kullanılarak karakterizasyonu
(Afyon Kocatepe Üniversitesi, 10.09.2019)
In this study, the effect of SiC reinforcement on the mechanical, physical properties and microstructure of copper matrix composite contact material was investigated with ultrasonic measurements. The composite materials ...
Algılayıcı türlerinin güneş takip sisteminde etkinliğinin araştırılması
(European Journal of Science and Technology, 01/08/2021)
Teknolojinin gelişmesi, enerjiye olan talep gün geçtikçe artmaktadır. Fosil yakıtların sınırlı olması alternatif enerji kaynakları aramaya teşvik etmektedir. Yenilenebilir enerji kaynakları kullanımı artan enerji talebini ...
Uptake of aniline and nitrobenzene from aqueous solution by organo-zeolite
(Environmental Technology, 06.04.2004)
Adsorption mechanisms of toxic non-ionic organic contaminants (NOCs), aniline and nitrobenzene, with natural-zeolite andorgano-zeolite (OZ) were investigated in both batch and continuous systems. In batch tests, the ...
Züccaciye camı üretim verimliliğinde doğru refrakter malzeme seçiminin etkileri
(Afyon Kocatepe Üniversitesi, Fen ve Mühendislik Bilimleri Dergisi, 28.10.2019)
Cam üretim sanayisinin gelişmesiyle birlikte daha kaliteli ve maliyet avantajlı cam üretmek en önemli hususlar olmuşlardır. Sektörün gelişmesiyle birlikte cam ergitme fırınlarında kullanılan refrakter malzemelerin seçimi ...