Ara
Toplam kayıt 996, listelenen: 961-970
Investigation of mechanical properties of boronized composites produced by electroless Ni coating
(Journal of Mineral, Metal and Material Engineering, 23.04.2020)
In this study, ceramic-metal composite production and characterization have been made in order to increase the service life of plotter tools used in soil industry. In the study Ni coated (36% AlN + 3% WC) powders were ...
Sintering and characterization of SiC reinforced Ni powders in microwave furnace
(International journal of engineering research and development, 28.01.2020)
In this study, SiC reinforced nickel matrix composites, microwave at different temperatures It is produced by sintering in oven. Nickel deposition on SiC powders was achieved by using electroless nickel plating technique. ...
Production and characterization of Ti-10Cr-3,33Co-3,33egg shelter composite materials using by powder metallurgy
(International journal of engineering research and development, 28.01.2020)
Titanium based intermetallic compounds are frequently used in the production of biomaterials. The behavior of titanium similar to bone mechanical properties causes the use of titanium as a biomaterial and preferred among ...
İnsan iç dünyasının anlamlandırılması maupassant ya da istemenin bedeli
(Afyon Kocatepe Üniversitesi, 1999)
Maupassant’da “İstemek, insanın mutsuzluğunun kaynağıdır; acının kaynağı yoksun kalmadır” . İstemenin bedeli, ölmek ya da yaşarken ölmektir Maupassant öykülerinde.
Zorlamalı tüy dökümü programlarında kekik ve L-Karnitin kullanılmasının yumurta tavuklarında ikinci yumurtlama periyodu verim parametreleri üzerine etkisi
(Erciyes Üniversitesi Veteriner Fakültesi Dergisi, 2019)
This study was carried out to use Oregano leaf and L-carnitine as an alternative feed additives in alfalfa
flour or low Sodium-Calcium (Na-Ca) diet and to determine their effect on second phase laying period after force ...
The effect of BaCO3 addition on the sintering behavior of lignite coal fly ash
(Elsevier, 11.04.2008)
The effect of BaCO
3
(witherite) addition on the sintering behavior of lignite coal fly ash taken from the
Seyitömer power plant of Kütahya/Turkey was examined at temperatures of 1100, 1150 and 1200 C
in air atmosphere. ...
Yeterince farkında olamadığımız atıl kaynağımız: Doğaltaş ocak ve fabrika atıkları
(Apa Yayıncılık Ltd. Şti., 01.03.2015)
Hem ülkemizde hem de dünyada yapı ve inşaat sektöründe, dekorasyon ve kaplama malzemesi olarak doğaltaş kullanımı gittikçe yaygınlaşmaktadır. Buna paralel olarak da ülkemizdeki doğaltaş üretimi ve bu üretim sırasında ortaya ...
Ti-Cr-Co kompozit malzemelerin poisson oranı, sertliği ve elastik modülleri arasındaki korelasyon
(Afyon Kocatepe Üniversitesi, 10.09.2019)
Çalışma, Ti-Cr-Cokompozit malzemelerin ultrasonik özelliklerini araştırmayı amaçlamaktadır. Deneysel olarak üretilen ve literatürden toplanan verilere dayanarak, Ti-Cr-Cokompozit numuneleri için Young modülü, Kayma Modülü ...
How improved to WC based hard materials
(Erzincan University, 31.12.2019)
Tungsten carbide is known to have excellent corrosion resistance and high hardness within carbide ceramics. Due to their superior mechanical properties and wear resistance, tungsten carbide cutting tools containing Co ...
Cu-SiC kompozitlerin mekanik özelliklerinin ultrasonik kullanılarak karakterizasyonu
(Afyon Kocatepe Üniversitesi, 10.09.2019)
In this study, the effect of SiC reinforcement on the mechanical, physical properties and microstructure of copper matrix composite contact material was investigated with ultrasonic measurements. The composite materials ...