Başlık için Makaleler listeleme
Toplam kayıt 17, listelenen: 1-17
-
Afyonkarahisar ilinde yetiştirilen yerli kazlarda cinsiyet ve yaşın karkas özellikleri üzerine etkisi
(Afyon Kocatepe Üniversitesi, 15.06.2020)Bu çalışmada Afyonkarahisar ilinde yetiştirilen kazlarda cinsiyet ve yaşın karkas özellikleri üzerine etkisi tespit edilmeye çalışılmıştır. Afyonkarahisar ilinde yetiştirilen kazlardan 8-9 aylık, 19-20 aylık yaşta ve her ... -
Algılayıcı türlerinin güneş takip sisteminde etkinliğinin araştırılması
(European Journal of Science and Technology, 01/08/2021)Teknolojinin gelişmesi, enerjiye olan talep gün geçtikçe artmaktadır. Fosil yakıtların sınırlı olması alternatif enerji kaynakları aramaya teşvik etmektedir. Yenilenebilir enerji kaynakları kullanımı artan enerji talebini ... -
Cu-SiC kompozitlerin mekanik özelliklerinin ultrasonik kullanılarak karakterizasyonu
(Afyon Kocatepe Üniversitesi, 10.09.2019)In this study, the effect of SiC reinforcement on the mechanical, physical properties and microstructure of copper matrix composite contact material was investigated with ultrasonic measurements. The composite materials ... -
Design and implementation of p&o maximum power point tracker algorithm based solar charge controller
(International journal of applied mathematics, electronics and computers, 30.06.2019)Solar energy is one of the main sources of renewable energy. In photovoltaic systems, energy is obtained from photovoltaic batteries. In photovoltaic batteries, the current and voltage do not increase linearly. This causes ... -
Determining properties of nickel based composite that reinforced by electroless nicel plated boron nitride and astaloy-CrM powders
(Eskişehir Teknik Üniversitesi, 31.03.2020)Industrial development brings with it the need for new materials every day. When it comes to obtaining more than one feature together, composite materials are at the forefront of the material groups. In composite ... -
Güneş ışınım tahmininde NARX modelinin uygulanması
(Afyon Kocatepe University, 2021)There is a transition from fossil fuels to renewable energy without resource constraints in electrical energy production. The most important of these resources is solar energy. The energy produced by solar panels is directly ... -
How improved to WC based hard materials
(Erzincan University, 31.12.2019)Tungsten carbide is known to have excellent corrosion resistance and high hardness within carbide ceramics. Due to their superior mechanical properties and wear resistance, tungsten carbide cutting tools containing Co ... -
Improvement of energy efficiency using a multi-input fuzzy logic controller in a stone cutting machine
(ASTM, 2018)Block cutter machines (BCMs) are commonly used in the manufacturing of natural stones. Although the energy consumption of the BCM is affected by the rotation speed of the blade, depth of cut, and traverse speed, these ... -
Investigation of mechanical properties of boronized composites produced by electroless Ni coating
(Journal of Mineral, Metal and Material Engineering, 23.04.2020)In this study, ceramic-metal composite production and characterization have been made in order to increase the service life of plotter tools used in soil industry. In the study Ni coated (36% AlN + 3% WC) powders were ... -
Investigation of the production and mechanical properties of silicon carbide-reinforced composites
(Iğdır üniversitesi, 09.2019)In this study, it was aimed to produce an intermetallic with low energy cost and better mechanical and physical properties with the microwave sintering method. Cupper matrix composites containing 4,8,12,16, and 20%SiC were ... -
On the design of an intelligent battery charge controller for PV panels
(EMaTTech Journals, 2012)The electricity generations of photo voltaic (PV) panels are strongly related with insolation and temperature. The insolation and temperature are not stable, since the electricity generations of the PV panels are not stable. ... -
On the investigation of the energy efficiency using PID and fuzzy logic controllers in a marble machine
(EMaTTech Journals, 2012)Energy consumption is the main cost item in the cutting machines with diamond segmented circular sawblade. Therefore, there are many benefits of taking measures for reducing the energy consumption. The aim of presented ... -
Performing speed control of a DC motor with auto-tuning PID
(Afyon Kocatepe Üniversitesi, 2019)Although advanced controllers are used in control applications, proportional-integral-derivative (PID) controllers are preferred in industry due to their simple structure and ease of application. However, it can difficult ... -
Production and characterization of Ti-10Cr-3,33Co-3,33egg shelter composite materials using by powder metallurgy
(International journal of engineering research and development, 28.01.2020)Titanium based intermetallic compounds are frequently used in the production of biomaterials. The behavior of titanium similar to bone mechanical properties causes the use of titanium as a biomaterial and preferred among ... -
A remotely accessible solar tracker system design
(AIP, 2014)In this paper, a new solar tracking system designed and constructed at Afyon Kocatepe University to maximize the efficiencies of different photovoltaic (PV) panels is proposed. The system is composed of two main parts: ... -
Sintering and characterization of SiC reinforced Ni powders in microwave furnace
(International journal of engineering research and development, 28.01.2020)In this study, SiC reinforced nickel matrix composites, microwave at different temperatures It is produced by sintering in oven. Nickel deposition on SiC powders was achieved by using electroless nickel plating technique. ... -
Ti-Cr-Co kompozit malzemelerin poisson oranı, sertliği ve elastik modülleri arasındaki korelasyon
(Afyon Kocatepe Üniversitesi, 10.09.2019)Çalışma, Ti-Cr-Cokompozit malzemelerin ultrasonik özelliklerini araştırmayı amaçlamaktadır. Deneysel olarak üretilen ve literatürden toplanan verilere dayanarak, Ti-Cr-Cokompozit numuneleri için Young modülü, Kayma Modülü ...
