Ara
Toplam kayıt 25, listelenen: 1-10
Investigation of Corrosion Behaviours Hydroxyapatite (HAP) coated Ti6Al4V Implants by Using Electrochemical Deposition Method
(2018)
In this research, hydroxyapatite (HAP) has been coated on the Ti6A14V alloy surface by electrophoresis
method. In this electrophoresis method, NH4H2PO4 is taken as P precursor and Ca (NO3)2.4H2O is taken
as Ca precursor ...
Investigation of corrosion and wear behavior of borided AISI P20 steel in micro-wave furnace
(IOP Publishing, 2019)
In this study, the effect of microwave boronizing treatment on the corrosion and wear behaviour of boride layer formed on AISI P20 steel have been investigated. The boronizing treatment was carried out using Ekabor-II ...
Investigation of diffusion kinetics of borided AISI P20 steel in micro-wave furnace
(Elsevier, 2015)
In present study, kinetics of borides formed on AISI P20 steel has been investigated by boronizing treatment which was carried out in Ekabor-II powders at the process temperatures of 1123, 1173 and 1223 K for 2, 4 and 6 h ...
Investigation of wear and adhesion behaviors of borided steels
(Springer, 2016)
In this study, AISI P20, H13 and D2 steels were pack borided at 900 and 950 °C for retention times of 2, 4 and 6 h. The boride layer thickness values changed depending on the chemical composition of the steels. The hardness ...
Investigation of tribological behaviour of plasma paste boronized of AISI 8620, 52100 and 440C steels
(Niscair, 2011)
In the present study, AISI 8620, 52100 and 440C steels were plasma paste boronized (PPB) by using 100% borax paste. PPB process was carried out in a dc plasma system at temperature of 700 and 800 °C for 3 and 5 h in a gas ...
Corrosion and wear behaviors of boronized AISI 316L stainless steel
(Springer, 2013)
In this study, the effects of a boronizing treatment on the corrosion and wear behaviors of AISI 316L austenitic stainless steel (AISI 316L) were examined. The corrosion behavior of the boronized samples was studied via ...
Adhesion and wear properties of boro-tempered ductile iron
(Elsevier, 2011)
In this study, adhesion and wear properties of boro-tempered ductile iron (BDI) were investigated. Boro-tempering was carried out on two stage processes i.e. boronizing and tempering. At the first stage, ductile iron samples ...
Surface characterization of pack and plasma paste boronized of 21NiCrMo2 steel [Kutu ve plazma pasta borlanmiş 21NiCrMo2 çeliǧinin yüzey karekterizasyonu]
(Journal of the Faculty of Engineering and Architecture of Gazi University, 2012)
In the present study, 21NiCrMo2 steel were plasma paste boronized by using 100 wt.% B2O3, 70 wt.% B2O3 +
30 wt. % SiC, 70 wt.% B2O3 + 30 wt.% B4C, 30 wt. % B2O3 + 70 wt.% SiC, 30 wt.% B2O3 + 70 wt.% B4C
pastes. This steel ...
Wear and corrosion behaviour of borided and nitrided m2 high speed steel
(Journal of the Balkan Tribological Association, 2013)
Boriding and nitriding lead to improved tribological and corrosive properties of M2 high speed steel. Boronising treatment was carried out in Ekabor-II powders at the process temperature of 950 degrees C for 4 h. Gas ...
Diffusion kinetics of borided AISI 52100 and AISI 440C steels
(Elsevier, 2012)
In this study, the case properties and diffusion kinetics of AISI 440C and AISI 52100 steels borided in Ekabor-II powder were investigated by conducting a series of experiments at temperatures of 1123, 1173 and 1223 K for ...