Başlık için Makaleler listeleme
Toplam kayıt 33, listelenen: 1-20
-
%3,0 Mg içeren borlanmış Co-Mg alaşımının yüzey özelliklerinin incelenmesi
(El-Cezerî Fen ve Mühendislik Dergisi, 2019)Bu çalışmada, %97 Co ve %3 Mg içeren Co-Mg alaşımına borlama işlemi gerçekleştirilmiştir. Co-Mg alaşım malzemesini üretmek için toz metalurjisi (TM) yöntemi kullanılmıştır. Bu yöntemde, Co ve Mg metal tozları kapalı ... -
Adhesion and wear properties of boro-tempered ductile iron
(Elsevier, 2011)In this study, adhesion and wear properties of boro-tempered ductile iron (BDI) were investigated. Boro-tempering was carried out on two stage processes i.e. boronizing and tempering. At the first stage, ductile iron samples ... -
Analysis with taguchi method of wear behaviors of borided AISI 52100 steels
(Journal of The Balkan Tribological Association, 2013)In this study, case properties and analysis of wear behaviour of borided AISI 52100 steel with the Taguchi method were investigated by conducting a series of experiments in Ekabor-II powders at process temperatures of 850, ... -
Boride layer growth kinetics of the borided high alloyed steels
(Oxidation Communications, 2015)In this study, the case properties and diffusion kinetics of high alloyed cold work tool steel borided in Ekabor-2 powder were investigated by conducting a series of experi-ments at temperatures of 1123, 1173 and 1223 K ... -
Borlanmış sementasyon çeliğinin tribolojik özelliklerinin incelenmesi
(El-Cezerî Fen ve Mühendislik Dergisi, 2019)Bu çalışmada farklı B2O3/SiC/B4C pasta karışımlarında plazma pasta borlanmış sementasyon çeliğinin yüksek yük altındaki aşınma davranışları inceleniştir. Plazma borlama işlemi vakum altında 10 mbar işlem basıncında, H2 ve ... -
Characterization and Rockwell-C adhesion properties of chromium-based borided steels
(Journal of Adhesion Science and Technology, 2015)In this study, adhesion properties of boride layers formed on the surface of AISI 52100, AISI 5140, AISI 440C, AISI 420 and AISI 304 steels were investigated. Boronizing treatment was carried out in Ekabor-II powders at ... -
The corrosion and wear behavior of TiN and TiAlN coated AISI 316 L stainless steel
(Springer, May 2014)In this study, TiN and TiAlN coatings were deposited on AISI 316 L stainless steel substrates by PVD techniques. The composition and crystalline structure of the as-deposited coatings were analyzed by energy dispersive ... -
Corrosion and wear behaviors of boronized AISI 316L stainless steel
(Springer, 2013)In this study, the effects of a boronizing treatment on the corrosion and wear behaviors of AISI 316L austenitic stainless steel (AISI 316L) were examined. The corrosion behavior of the boronized samples was studied via ... -
Corrosion behavior of boro-tempered ductile iron
(Springer, May 2010)In this study, the effect of boro-tempering heat treatment on the microstructure and corrosion behavior of unalloyed ductile iron was investigated. The corrosion characteristics of ductile iron have been determined by ... -
Diffusion kinetics of borided AISI 52100 and AISI 440C steels
(Elsevier, 2012)In this study, the case properties and diffusion kinetics of AISI 440C and AISI 52100 steels borided in Ekabor-II powder were investigated by conducting a series of experiments at temperatures of 1123, 1173 and 1223 K for ... -
Effect of N2 + H2 gas mixtures in plasma nitriding on tribological properties of duplex surface treated steels
(Elsevier, 2008)Thermo-reactive diffusion chromizing followed by pulsed plasma nitriding were carried out on AISI 52100 and 8620 bearing steels. The chromized samples were pulse-plasma nitrided for 5 h at 500 °C in various N2–H2 gas ... -
Effect of sliding speed on friction and wear behaviour of borided gear steels
(Journal of the Balkan Tribological Association, 2014)In this study, the wear behaviour of GS18NiMoCr36 (GS18), GS22NiMoCr56 (GS22) and GS32NiCrMo6.4 (GS32) gear steels borided in Ekabor-II powder was investigated by conducting a series of experiments at temperatures ... -
The effects of boro-tempering heat treatment on microstructural properties of ductile iron
(Elsevier, March 2011)In this study, the effects of boro-tempering heat treatment on microstructural properties of ductile iron were investigated. Test samples with dimensions of 10 × 10 × 55 mm were boronized at 900 °C for 1, 3 and 5 h and ... -
Electrochemical corrosion behavior of high velocity Oxy-Fuel (HVOF) superalloy coatings on ductile irons
(Sakarya University Journal of Science, 2019)In this study, alloyed and unalloyed ductile irons (DI) were coated with two different Ni-based superalloy materials by HVOF method. Microstructure and phase analyzes of the coatings were performed by using SEM, EDX, XRD ... -
How improved to WC based hard materials
(Erzincan University, 31.12.2019)Tungsten carbide is known to have excellent corrosion resistance and high hardness within carbide ceramics. Due to their superior mechanical properties and wear resistance, tungsten carbide cutting tools containing Co ... -
Investigation of corrosion and wear behavior of borided AISI P20 steel in micro-wave furnace
(IOP Publishing, 2019)In this study, the effect of microwave boronizing treatment on the corrosion and wear behaviour of boride layer formed on AISI P20 steel have been investigated. The boronizing treatment was carried out using Ekabor-II ... -
Investigation of corrosion behavior of borided gear steels
(Springer, 2014)In this study, corrosion behaviors of GS18NiMoCr36 (GS 18) and GS32NiCrMo6.4 (GS 32) gear steels borided in Ekabor-II powder at the temperature of 950 °C for 2 and 6 h were investigated in a 6 % M HCI acid solution. The ... -
Investigation of corrosion behaviors at different solutions of boronized AISI 316L stainless steel
(Springer, May 2013)In this study, corrosion behaviors of boronized and non-boronized AISI 316L stainless steel (AISI 316L SS) were investigated with Tafel extrapolation and linear polarization methods in different solutions (1 mol dm−3 HCl, ... -
Investigation of Corrosion Behaviours Hydroxyapatite (HAP) coated Ti6Al4V Implants by Using Electrochemical Deposition Method
(2018)In this research, hydroxyapatite (HAP) has been coated on the Ti6A14V alloy surface by electrophoresis method. In this electrophoresis method, NH4H2PO4 is taken as P precursor and Ca (NO3)2.4H2O is taken as Ca precursor ... -
Investigation of diffusion kinetics of borided AISI P20 steel in micro-wave furnace
(Elsevier, 2015)In present study, kinetics of borides formed on AISI P20 steel has been investigated by boronizing treatment which was carried out in Ekabor-II powders at the process temperatures of 1123, 1173 and 1223 K for 2, 4 and 6 h ...
