Erişim şekli için "info:eu-repo/semantics/closedAccess" Kimya Bölümü listeleme
Toplam kayıt 13, listelenen: 1-13
-
Corrosion and wear behaviors of boronized AISI 316L stainless steel
(Springer, 2013)In this study, the effects of a boronizing treatment on the corrosion and wear behaviors of AISI 316L austenitic stainless steel (AISI 316L) were examined. The corrosion behavior of the boronized samples was studied via ... -
Corrosion behavior of 13Cr casing steel in cement-synthetic pore solution exposed to high pressure CO2 and H2S
(The Electrochemical Society, 2015)The electrochemical corrosion behavior of grade L-80, type 13Cr casing steel was investigated in cement-synthetic pore solution (CSPS) exposed to CO2 and H2S using in-situ electrochemical methods and ex-situ surface analyses ... -
Corrosion behavior of boro-tempered ductile iron
(Springer, May 2010)In this study, the effect of boro-tempering heat treatment on the microstructure and corrosion behavior of unalloyed ductile iron was investigated. The corrosion characteristics of ductile iron have been determined by ... -
Corrosion behavior of ultra-high strength drilling steel in alkaline brines containing hydrogen sulfide at high temperature
(Nace International, 2016)In-situ electrochemical measurements were used to study the sour corrosion of ultra-high strength low alloy carbon steel (UHSLA) in alkaline brines at 200 °C. The solutions were buffered with NaHCO3 / Na2CO3 / NaOH to pH ... -
Corrosion inhibition of st37 steel in geothermal fluid by quercus robur and pomegranate peels extracts
(Pleiades Publishing, Ltd, 2015)Plant extracts have become important as an environmentally acceptable, readily available and renewable source of wide range of inhibitors. Tannins, a class of natural, non toxic and biodegradable polyphenolic compounds, ... -
Corrosion of 13Cr steel at the Cement/Casing interface in CO2/H2S environments at 4, 85 and 200 °C
(Nace International, 2018)A study was carried out to investigate corrosion at the cement/casing interface for 13Cr casing steel. Cement simulated pore solution (CSPS) was developed by exposing cement pieces to 5% NaCl at 100 °C and 10 MPa in ... -
Effect of H2S and CO2 on Cement/Casing alloy interface corrosion integrity for cold climate oil and gas well applications
(The Electrochemical Society, 2016)A study has been carried out to investigate sweet and sour corrosion at the cement-casing interface for offshore oil and gaswells in cold climate. The test solution chemistry was determined by sampling pore water from ... -
Effects of CO2 and H2S on corrosion of martensitic steels in brines at low temperature
(Nace International, 2018)Corrosion studies were conducted for martensitic carbon steels in 5 wt% NaCl brine solutions at 4°C and 10 MPa (1,450 psi). These studies simulated different subsurface environments relevant to Arctic drilling. Here, two ... -
Effects of CO2 and H2S on corrosion of martensitic steels in NaCl(aq) at low temperature
(Nace International, 2016)Corrosion studies were conducted for martensitic carbon steels in brine solutions at 4 °C and 10 MPa (1450 psi), which simulated the subsurface environments encountered in Arctic drilling. Three environments with a 5 % wt. ... -
Effects of H2S and CO2 on Cement/Casing interface corrosion integrity for cold climate oil and gas well applications
(The Electrochemical Society, 2016)Low-temperature corrosion relevant to oil and gas wells was investigated. Casing cement was exposed to brine in contact with CO2 at 4 °C and 10 MPa. Pore water was extracted from wet cement using a die press, and a cement ... -
Electrochemical corrosion behavior of high strength carbon steel in H2S-Containing alkaline brines
(The Electrochemical Society, 2015)The electrochemical corrosion behavior of high strength low alloy carbon steel API S-135 was investigated using in-situ electrochemical measurements, ex situ surface analyses, and software modeling in the alkaline brines ... -
Electrochemical determination of bisphenol a with pencil graphite electrodes modified with Co(II), Ni(II), Cu(II) and Fe(II) phthalocyaninetetrasulfonates
(The Japan Society for Analytical Chemistry, 2016)Pencil graphite electrodes modified with Co(II), Ni(II), Cu(II) and Fe(II) metallophthalocyaninetetrasulfonates (MePcTSs) were investigated for electrochemical determination of bisphenol A (BPA). Electrochemical performances ... -
Investigation of corrosion behaviors at different solutions of boronized AISI 316L stainless steel
(Springer, May 2013)In this study, corrosion behaviors of boronized and non-boronized AISI 316L stainless steel (AISI 316L SS) were investigated with Tafel extrapolation and linear polarization methods in different solutions (1 mol dm−3 HCl, ...